Great Planes Little Toni 61 ARF .61-.91 63" GPMA1320

Great Planes Little Toni 61 ARF .61-.91 63" GPMA1320

This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly Great Planes Cosmic Wind Little Toni Sport Pylon Racer Airplane. 27.5% scale (IMAA legal) For Intermediate to Advanced Modeler/Fliers.

Features

• Great Planes Little Toni 61 ARF .61-.91 63" GPMA1320

• Construction: Fiberglass, balsa and plywood

• Wing: Balsa and plywood, one-piece

• Fuselage: Fiberglass, pre-painted and trimmed

• Covering: Top Flite True Red MonoKote, TOPQ0227

• Radio Compartment: Plywood reinforced

• Wheel Pants and Cowling: Fiberglass, painted to match covering scheme

• Canopy: Single, clear

• Landing Gear: Pre-painted aluminum .12" (3mm) thick w/ 2.25" (70mm) diameter foam main wheels, 1.25" (32mm) foam tailwheel, and pre-bent .08" (2mm) diameter wire tail gear

• Aileron Control: Dual servo

• Hardware: Full set included

• Motor Mount: Nylon adjustable

• Fuel Tank: 14.2oz (420cc) rectangular

• Spinner: 3" (76mm) aluminum

• Building Time: Ready to fly in 12-15 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at date of purchase.

Specifications

• Wingspan: 63 " (1600mm)

• Wing Area: 775 sq in (50.06 sq dm)

• Weight: 7.25 - 8.25lb (3290 - 3740g)

• Wing Loading: 21.5 - 24.5 oz/sq ft (65 - 75 g/sq dm)

• Length: 56.5" (1435mm)

• Airfoil: Fully symmetrical, low-wing configuration

• Center of Gravity: 3-3/8" (86mm) Measured from wing's leading edge at the fuselage sides.

• Control Throws- Low Rate High Rate

• Ailerons: Up & Down �" (6.35mm) 3/8" (9.5mm)

• Elevator: Up & Down �" (12.7mm) �" (19mm)

• Rudder: Right & Left �" (19mm) 1-1/8" (28mm)

• Incidence-

• Stab: 0�

• Bottom Wing: 0�

• Engine: +2� up, 3� right

• Dihedral- With one panel lying flat, tip of other panel should be 6" (152mm)

Contents

• Pre-built wing fuselage and tail assemblies prebent aluminum main landing gear, 2 main wheels, tailwheel wire with wheel, engine mount, hardware package, fiberglass cowling and wheel pants, clear canopy, decals, aluminum spinner, photo-illustrated instructions, 

Requirements

• Engine: .61 cu in (10cc) 2-stroke OR .91 (15cc) 4-stroke

• Muffler: Stock type supplied with engine, engine mounts at 90� angle

• Radio: 4-Channel

• Servos: 4-with at least 54 oz-in torque

• 1-with at least 30 oz-in torque (for throttle) (2-ailerons, 1-elevator, 1-rudder, 1-throttle)

• Servo Extension: Two 6" (152mm)-for ailerons

• Y-Harness: One-for aileron servos

• Misc. Items: glow plug, �" foam rubber padding, 3' medium fuel tubing, fuel filter, propeller, building and field equipment.

Comments

• To convert this airplane to Brushless motor power, the following items are required:

• KONG5060-Kontronik 600 Brushless Motor Set

• JTCG6801-Motor Mount

• 7-cell NiMH 1900mAh batteries (3 required)

• Charger-Great Planes TRITON series

• APCQ4145-14x7 Prop for Electric Motors

• GPMQ4442-Servo Tape

• WSDM3001-Dean's Ultra Plug (quantity depends on how battery pack is assembled)

• GPMQ4610-6mm Prop Adapter

• Tie Straps

• If a replacement fuel tank is needed the Great Planes 14oz, GPMQ4106 can be used. A separate section of plywood must be glued to the firewall to clear the lip on the replacement tank and the stopper hole re-drilled in the firewall.

• Pilot head pictured on box is not included. A �-Scale Sportsman Pilot will fit under canopy.

• This spinner differs from the one shown in the manual. It includes a spinner adapter nut that fits the O.S. .61 two-stroke and .91 four stroke engines. It may be necessary to shorten the length of the spinner cone attachment bolt depending what propeller you choose.