Great Planes Revolver .46-.70 GP/EP Sport Aerobatic ARF GPMA1018

Great Planes Revolver .46-.70 GP/EP Sport Aerobatic ARF GPMA1018

This is the radio controlled, glow or electric powered, almost-ready-to-fly, Great Planes Revolver Sport Aerobatic Airplane. For Average Sport Pilots.

Features

• Great Planes Revolver .46-.70 GP/EP Sport Aerobatic ARF GPMA1018

• Construction: Balsa and ply

• Wings: Two piece, foam core balsa sheeted, aluminum wing tube

• Cowl: Painted fiberglass

• Covering: Factory applied Top Flite MonoKote

• Radio Compartment: Plywood reinforced

• Landing Gear: Pre-formed composite

• Wheels: Two main 2.71" (69mm) diameter, one 1.18" (30mm) tail wheel

• Wheel Pants: Painted and constructed of fiberglass

• Spinner: 3.25" (83mm) diameter aluminum

• Canopy: Vacuum formed, tinted

• Aileron Control: Dual servo

• Tail Group: Airfoil shaped tail surfaces for better tracking

• Fuel Tank: Approximately 16oz (480cc)

• Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase

Specifications

• Wingspan: 59" (1500mm)

• Wing Area: 563 sq in (36 sq dm)

• Flying Weight: 6 - 7lb (2720 - 3180g)

• Wing Loading: 25 - 29 oz/sq ft (76 - 88 g/sq dm)

• Length: 48" (1220mm)

• Airfoil: Semi symmetrical

• Center of Gravity: 4-5/16" (110mm) Back from the leading edge of the wing at the fuselage

• Control Throws: Low Rate High Rate

• Elevator: Up & Down, 5/16" (8mm) 1/2" (13mm)

• Rudder: Right to Left, 1-3/8" (35mm) 2-1/4" (57mm)

• Ailerons: Up & Down, 1/4" (6mm) 3/8" (10mm)

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, main and tail wheels, wood servo trays, two wheel pants, fiberglass cowl, hardware package,engine mount, pilot, fuel tank, photo-illustrated instructions and decal sheet

Requirements

• Engine: .46 -.55 cu in (7 - 9cc) two stroke OR .70 cu in (11.5cc) four stroke OR brushless motor (see below)

• Muffler: Pitts type (BISG4046)

• Motor: Brushless type Great Planes RimFire 42-60-800 (GPMG4725)

• Motor Mount: Medium size, (GPMG1255)

• Electronic Speed Control: 80A (GPMM1860)

• Radio: 4-channel minimum

• Servos: 4 standard size coreless ball bearing for electric operation, one extra servo required for throttle if using glow engine

• 6" (152mm) Servo Extension: (HCAM2701)

• Y-Harness: One for aileron servos (HCAM2751)

• Battery: Two 3200mAh 11.1V Balanced LiPo (GPMP0623)

• Equinox LiPo Cell Balancer: (GPMM3160)

• Adapter: Deans U Adapter 2 to 1 (GPMM3143)

• Battery Charger: LiPo compatible (GPMM3015)

• Propeller: Glow, size depending on engine selected

• Electric, 11.5x5 (APCQ1055)

• Misc. Items: Building and field equipment

Comments

• N/A