Hobbico Hobbistar 60 MkIII ARF .61,71" HCAA2125

Hobbico Hobbistar 60 MkIII ARF HCAA2125

This is a 90% Prebuilt, Radio Controlled, Glow Powered, Almost-Ready-to-Fly, Hobbico Hobbistar 60 MKIII .60 Sport Scale All-Wood Airplane. For Beginner Modeler/Fliers.

Features

• Hobbico Hobbistar 60 MkIII ARF HCAA2125

• Construction: All balsa and plywood

• Wings: Two halves join to make a one-piece, all-wood wing

• Huge 71" wingspan improves stabilty and visibility.

• Covering: Factory applied adhesive backed (not carried separately)

• Colors are Blue and White with Red and Orange stripes.

• Radio Compartment: PLywood reinforced,located under the wing.

• Landing Gear: Wire tricycle style.

• Single Aileron Servo: Mounted in the center of the wing.

• Complete hardware package with spinner, wheels, and engine mount.

• Building Time: Ready to fly in only 15 - 20 hours.

• Warranty Period: 90-days covering defects or workmanship.

Specifications

• Wingspan: 71" (1805mm)

• Wing Area: 888" (57 dm2)

• Wing Chord: 12.5"

• Weight: 7-8lb (3175-3629g)

• Wing Loading: 18-21 oz/sq ft (55-64 g/dm2)

• Length: 55" (1400mm)

• Width- 3 3/8" Airfoil: Semi-Symmetrical, High-Wing

• Center of Gravity: 3" Back from the wing's leading edge at the fuselage sides.

• Control Throws- Ailerons: Up & Down 3/8" (11mm) Elevator: Up & Down 1/2" (13mm) Rudder: Right & Left 1" (26mm)

• Items needed to convert this plane to Electric:

• Motor: Sport & Power Applications, FUN480-33 (KONG2040)

• Battery: Sport Application, 32A @ 10 cells (12.0V) Power Application, 33A @ 12 cells (14.4V)

• Aeronaut Prop: Sport Application, 12.5x7 Power Application, 12.x6

• APC Prop: Sport Application, 12x8E (APCQ4133)

• Drive Set: Brushless, KONG5020

• Power Application, 14x7E (APCQ4128)

• Speed Control: Sport Application, Smile 40-6-12 Power Application, Jazz 40-6-18 (KONM3100)

• Gear Drive: Sport & Power Application, KPG25 4.2:1

• Drive Set: Brushless Set 480 Sport & Power Application, (KONG5020)

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent 3/16" main landing gear, 3/16" nose gear wire, 2.75" wheels, metal one-piece engine mount with mounting straps, 14 oz (420cc) fuel tank, 2-3/4" spinner, wood servo trays and wing joiners, hardware package and photo-illustrated instructions.

Requirements

• Engine: .61 (10cc) (2-stroke) or .91 (15cc) (4-stroke)

• Muffler: Standard (Engine mounts in an upright position)

• Radio: 4 Channel

• Servos: 4 Standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)

• Servo Extension 6": 1 (Futaba radios usually include this)

• Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing, fuel filter, propeller, building, and field equipment.

Comments

• N/A
  
  
  ?