Hobbico SuperStar .40 MonoKote ARF HCAA2020

Hobbico SuperStar .40 MonoKote ARF HCAA2020

This is a Superstar 40 MonoKote Covered, Almost-Ready-to-Fly Trainer Airplane. This is Designed for the Beginner Modeler Having a Large Flat-Bottom Wing for Increased Lift and Stability, and a Thick Leading Edge to Help Prevent and Smooth Out Stalls.

Features

• Hobbico SuperStar .40 MonoKote ARF HCAA2020

• Fuselage is Pre-Covered and Pre-Assembled Sheeted Box Style

• Wing is Pre-Covered Ribbed Balsa with Flat Bottom Airfoil

• Tail Sections are Solid Balsa and is Pre-Covered

• 90% Pre-Assembled, All Wood, Almost-Ready-to-Fly Kit

• 15 to 20 Hours Assembly Time

Specifications

• Wingspan: 60" Fuel Tank: 10.5oz

• Wing Area: 660 sq. in. Wing Loading: 19oz per sq foot

• Fuselage Length: 50" Weight: 5.5lbs

• Center of Gravity: 3 - 3.5" (71 - 89mm) from leading edge of wing measured at the fuselage side

• Airfoil: Flat-Bottom High-Wing

Contents

• All Necessary Hardware, Wire Landing Gear, Fuel Tank, Nylon Engine Mount (HCAG3735), CA Hinges, Wheel Collars, Step-By-Step

• Instructions, Pre-Covered Fuselage, Wing, Tail Set, Pushrods, 2�" Spinner (GPMQ4515).

Requirements

• Engine: .35-.46 (2-stroke)

• Radio: 4 Channel w/4 Standard Servos

• Misc. Items: Foam Rubber, Rubber Bands, Fuel Tubing, Screw Lock Connectors, Building and Field Equipment.

Comments

• This Airplane comes in two other versions: The Original Trim Scheme is White w/Blue, Pink and Yellow The MonoKote Trim Scheme is White w/Red, Yellow and Blue

• Items needed to convert this plane to Brushless electric power:

• KONG5020-Kontronik 480 Brushless Motor Set

• APCQ4128-11x7 Propeller for Electric Motors

• 6-cell Batteries (2 required)

• GPMM3001-Battery Charger DTXC2280-KYO Battery Connectors for ESC

• JTCG6801-Motor Mount

• GPMG0855-Prop Drive w/Set Screw

• GPMG0856-Aluminum Prop Drive Washer

• GPMQ4442-Double Sided Servo Tape

• Tie Straps
  
  ?