Hobbico Twinstar .25 Twin ARF HCAA2076
This is the radio controlled, glow powered, Almost-Ready-to-Fly, Hobbico Twinstar Scale Trainer Airplane. For beginner to intermediate modeler/fliers.
Features
Hobbico Twinstar .25 Twin ARF HCAA2076
Construction: Balsa and plywood
Wings: Two piece balsa and plywood joins with plywood joiners, attaches with nylon bolts, left and right engine nacelles must be attached
Engine Nacelles: Constructed of plywood, covered and trimmed
Covering: Factory applied, iron-on, color scheme is White with Red,
Blue and Black stripes on wing, fuselage and tail sections, Black sections simulate cabin windows
Radio Compartment: Plywood reinforced, accessible from bottom of fuselage where wing attaches
Cowling: Pre-painted fiberglass, White with stripes applied
Landing Gear: Fixed tricycle style with 0.16" (4mm) diameter wires
Wheels: Foam, three 2-3/4" (70mm) diameter
Aileron Control: Single servo
Spinners: Two 2" (51mm) constructed of plastic, Red in color
Engine Mounts: Two nylon, adjustable
Fuel Tanks: Two, approximate 4oz (120cc) capacity
Building Time: Ready To Fly in several hours
Hardware: Full set included
Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at purchase date. This warranty does not cover any component parts damaged by use or modification.
Specifications
Wingspan: 56" (1420mm)
Wing Area: 560 sq in (36.1 sq dm)
Weight: 5 - 5.5lb (2270g - 2490g)
Wing Loading: 21-23 oz/sq ft (64-70g/sq dm)
Length: 50" (1270mm)
Airfoil: Semi-symmetrical, low-wing placement
Center of Gravity: 3-1/4" (83mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: Up & Down 3/8" (9.5mm) 1/4" (6mm)
Rudder: Right to Left 1" (25mm) 7/8" (22.5mm)
Ailerons: Up & Down 3/8" (9.5mm) 1/4" (6mm)
Contents
Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent 0.16" (4mm) tricycle landing gear, three 2-3/4" (70mm) wheels, two engine mounts, two fuel tanks, two 2" (51mm) spinners wood servo trays and wing joiners, hardware package, engine nacelles, photo-illustrated instructions.
Requirements
Engines: Two .20 - .40 cu in (3.3 - 6.5cc) 2-stroke OR two .26 -.30 cu in (4.2 - 4.9 cc) 4-stroke
Muffler: Sports-Style supplied with engine (Engines mount in an upright position)
Radio: 4-Channel
Servos: 5-Standard (1-Aileron, 1-Elevator, 2-Throttle, 1-Rudder)
Y-Harness: One, for throttle servos
Misc. Items: Glow plug, 1/2" foam rubber padding, medium fuel tubing, fuel, fuel filters, propellers, building and field equipment.
Comments
N/A
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more