Top Flite B-25 Mitchell Bomber .46-70 Gold Edition ARF TOPA0980
This is the radio controlled, glow powered, 1/9 scale, Almost-Ready-to-Fly, Top Flite B-25J Mitchell Bomber Scale Airplane. For Intermediate to Advanced Modelers. Named after General Billy Mitchell of the Army Air Corps, this is a model of the twin engine medium range bomber made famous by Jimmie Doolittle's raid on Tokyo early in WWII.
Features
Top Flite B-25 Mitchell Bomber .46-70 Gold Edition ARF TOPA0980
Construction: Balsa and plywood
Wings: Plug-in type for easy, accurate assembly with removable outboard and inboard wing panels
Covering: Pre-covered in flat Top Flite MonoKote, color scheme is flat black and flat olive drab with gray and white trim
Radio Compartment: Plywood reinforced
Cowling: Fiberglass
Engine Nacelles: Constructed of fiberglass over built-up wooden understructure
Canopy and Windows: Clear molded plastic
Landing Gear: Fixed wire .197" (5mm) diameter with scale fiberglass landing gear doors. Includes instructions and hardware for operational spring loaded mechanism to open and close the doors when using the optional Robart Retracts (ROBQ1624)
Wheels: Foam construction, two 3.8" (98mm) diameter main wheels and one 2-5/8" (68mm) nose wheel
Aileron Control: Dual servos
Interior Features: Detailed nose gunner deck including, ammo boxes, kneeling pad and pivoting .50 caliber machine gun; Twin .50 caliber tail machine guns, .50 caliber side mounted machine guns; Detailed instrument panel
Fuel Tanks: Two 14.2oz (420cc)
Building Time: Ready to fly in approximately 45 hours
Warranty: Top Flite Models guarantees this kit free of defects in material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
Specifications
Wingspan: 88.5" (2255mm)
Wing Area: 1036 sq in (66.8 dm2)
Weight: 17 - 19lbs (7710 - 8620g)
Wing Loading: 38 -42 oz/sq ft (116 - 128g/dm2)
Length: 70.5" (1795mm)
Airfoil: Semi symmetrical
Center of Gravity: 5" (127mm) measured at both inboard wing panels back from the leading edges where they meet the fuselage
Control Throws: High Rate Low Rate
Elevator: Up & Down 1�" (32mm) 1" (25mm)
Rudder: Right & Left 1�" (32mm) �" (19mm)
Ailerons: Up & Down 5/8" (16mm) 3/8" (10mm)
Flaps: Up and Down �" (13mm) 1" (25mm)
Contents
Pre-built and covered wings, fuselage and tail feathers, cockpit canopy, tail gunner canopy, top turret canopy, Nose-gunner window and canopy bottom, pushrods, replica radial engines, 2 dimentional pilot, copilot and gunner figures, pre-bent landing gear wires, wheels, landing gear doors, cowls, nacelle covers, antennas and machine gun blisters, engine mounts, engine mount templates for OS .70 Surpass four stroke and .40-.55 two strokes, yellow painted spinner hubs, two 420 cc fuel tanks with hardware, wood servo trays, plastic machine guns, pilot/Co-pilot seat backs, nose-gunner cabin floor, ammo tray, ammo boxes, building/transport stand, Great Planes hardware package, decals, photo-illustrated instructions
Requirements
Engines: Two .46-.50 cu in (7.5 - 8cc) 2-stroke OR
Two .70 cu in (11.5cc) 4-stroke
Exhaust: Standard mufflers supplied with engines
Radio: 7-channel without landing gear
8-channel with landing gear
Servos: Ailerons: 2 standard
Elevator: 1 high torque at least 50oz (FUTM0075)
Throttle: 2 standard for independent throttle control
Rudder: 2 mini at least 35oz torque (FUTM0415)
Flaps: 4 standard (2 for inboard panels, 2 for outboard)
Nose Steering: 1 standard
Landing Gear: 1 standard
Servo Extensions: Four 6" (152mm)
Two 12" (300mm)
Five 24" (600mm)
One 36" (910mm)
Y-Harnesses: Five
Receiver Battery: 2000mAh minimum
Misc. Items: Glow plugs, �" foam rubber padding, medium fuel tubing fuel filter, propeller based on engine selection
Comments
The following Top Flite Monokote colors were used for the covering.
Jet White TOPQ0204 Flat Olive Drab TOPQ0510
Flat Black TOPQ0508 Flat Dove Gray TOPQ0511
********IMPORTANT RETRACT INFORMATION*********
The Robart Air Control Kit specified in the manual is incorrect, the pressure tank is too large. If this system was already purchased, the pressure tank can be mounted inside the top of the fuselage behind the cockpit. A smaller pressure tank that is compatible can be purchased alone-#172 Small Pressure Tank (ROBQ2372).
To convert to retracts, here are the updated items; #TFB25 Robart Tri-Gear Retract System for B-25 Mitchell (ROBQ1624), #188VRX Standard Deluxe Air Control Kit (ROBQ2307) #190 Air Line Quick Disconnects (ROBQ2395) Standard servo to operate air control valve (HCAM0149)
This model is eligible to compete in the Fun Scale Class in AMA as well as IMAA events.
Photos and scale documentation for the full-size B-25J are available through Bob's Aircraft Documentation, (714) 979-8058 begin_of_the_skype_highlighting (714) 979-8058 end_of_the_skype_highlighting, www.bobsairdoc.com
?
?
?
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more