Top Flite Cessna 310 Twin Engine ARF 81" TOPA0910

Top Flite Cessna 310 Twin Engine ARF 81" TOPA0910

This is the radio controlled, glow powered, Almost-Ready-to-Fly, IMAA legal Top Flite Cessna 310 Twin Engine Scale Airplane. For Intermediate to Advanced Modeler/Fliers. This model is close to a 1/5 scale (18.2%).

Features

• Top Flite Cessna 310 Twin Engine ARF 81" TOPA0910

• Construction: Wood construction wing with fiberglass fuselage, wing tip tanks and nacelles

• Wings: Prebuilt wing halves slide onto an aluminum wing joiner and bolt to the fuselage

• Covering: Factory applied Top Flite MonoKote, color scheme consists of White (TOPQ0204), Sky Blue (TOPQ0206) and Insignia Blue (TOPQ0207)

• Radio Compartment: Factory installed, plywood construction

• Nacelles: Factory painted, fiberglass construction

• Lighting System: Nose, tip tanks and tail surface lights are factory installed and wired with Futaba J style connectors

• Cockpit: The included cockpit interior with pilot bust hides the internal structure and radio gear

• Carefully engineered engine thrust keeps the model controllable even if one engine quits during a flight

• Landing Gear: Fixed .20" (5mm) diameter wire type (optional scale

• Robart retractable landing gear available separately - ROBQ1623)

• Wheels: 2.75" (70mm) diameter nose and 3.5" (90mm) diameter main

• Engine Mounts: Two nylon adjustable Great Planes 40-70 - GPMG1061

• Pilot Bust: Factory decorated (4.4" wide 2.2" deep and 4.4" tall)

• Aileron Control: Twin servo

• Flap Control: Twin servo

• Spinners: Two 2.5" (64mm) diameter aluminum construction

• Fuel Tank: Two 14oz (420cc) dimensions are 5.5" x 2.8" x 2.15"

• Building Time: Ready to fly in only 30-45 hours.

• Warranty: Top Flite Models guarantees this kit free from defects in material and workmanship at the date of purchase. Warranty does not cover any component parts damaged by use or modification.

Specifications

• Wingspan: 81" (2057mm)

• Wing Area: 914 sq in (58.9 sq dm)

• Weight: 17 - 20lb (7771 - 9072g)

• Wing Loading: 43 - 50oz/sq ft (131 - 153g/sq dm)

• Length: 66" (1680mm)

• Center of Gravity: 3.75" (95mm) Back from the wing's leading edge

• Control Throws-     High Rate                         Low Rate

• Elevator:             Up & Down 5/8" (25mm)       3/8" (19mm)

• Rudder:             Right to Left 1�" (38mm)       1" (25mm)

  Ailerons:             Up & Down �" (19mm)           - �" (13mm)

• Incidences-

• Stab: 0�

• Wing: +1.5�

• Engine: 2� down, 4� outboard thrust

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, cockpit interior, lighting system, 2 main wheels, 1 nose wheel, 2 engine mounts, 2 14oz fuel tanks, 2 2.5" aluminum spinners, wood servo trays, wing joiners, hardware package and photo-illustrated instructions.

Requirements

• Engines: Two .46 - .51 cu in (7.5 - 8.5 cc) 2-stroke, the O.S. .46 AX and the Bisson Pitts muffler is a good choice to keep everything hidden under the nacelles .70 to .80 cu in (11.5 - 13.1 cc) 4-stroke can be used but will require extensive modification to the cowl

• Muffler: Bisson Pitts - BISG4046 (engine is side mounted)

• Radio: 6-channel minimum, 8-or 9-ch for retracts

• Servos: Six 54 oz-in (2 flaps, 2 ailerons, 1 rudder and 1 elevator)

• Two 40 oz-in (2 throttle)

• One 40oz-in servo if you are installing the retracts

• 12" (305mm) Servo Extensions: Four

• 24" (610mm) Extensions: Two

• Y-Connectors: Three

• Misc. Items: Glow plugs, �" foam rubber padding, medium fuel tubing fuel filter, propellers, building and field equipment.

Comments

• To install Robart Tri Gear Landing Gear setup order,

• Cessna 310 Tri Gear Set ROBQ1623

• Standard Air Control Kit ROBQ2302

• 10' Pressure Tubing ROBQ2369

• Air Line Quick Disconnects ROBQ2395

?

?

?