Top Flite Elder .40 Size Kit TOPA0215
This is the Radio Controlled, Glow Powered, Balsa and Plywood Top Flite Gold Edition Elder .40 Sport Scale Aerobatic Airplane Kit. For Intermediate to Advanced Modeler/Fliers. The Elder 40's Legacy began in 1985, when it was first introduced by Top Flite.
Features
Top Flite Elder .40 Size Kit TOPA0215
Top Flite is bringing back the Classic Elder 40, with one major distinction: Gold Edition CAD engineering.
An Ideal Second model, can be flight ready in just a few weekends.
Features assembly aids such as pre-shaped leading and trailing edges and built-up wing tips.
Wings are one-piece, all wood with ailerons and plywood wing joiners.
Spacious radio compartment allow easy radio gear installation and quick fuel tank access.
Open rear section of the fuselage, with its trusswork and gussets, further exemplifies the planes vintage heritage.
Pre-formed, .12" (3mm) 2-piece wire landing gear provides excellent ground handling
Wooden parts are included for creating the flying wire braces shown on the box, used for attaching either elastic cord (not included) or for added realism, metal wire with miniature turnbuckles.
Warranty: Top Flite Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.
Specifications
Wingspan: 65" (1651mm)
Wing Area: 778sq in (50dm2)
Weight: 5.5-7.0lb (2495-3175kg)
Wing Loading: 16.3 - 20.7oz/sq ft (50-63g/dm2)
Length: 49.5" (1257mm)
Airfoil: Flat bottom
Center of Gravity: 3�" (89mm) Back from the wing's leading edge at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down �" (6mm) 3/8" (9.5mm)
Elevator: Up & Down 7/16" (11mm) 5/8" (16mm)
Rudder: Right & Left �" (13mm) �" (19mm)
Incidence-
Engine Down Thrust: 5�
Engine Right thrust: 2�
Wing: 0�
Stabilizer: 0�
Contents
One Glow Powered Top Flite Gold Edition Elder .40 Sport Scale Kit with all wood to construct the airplane, pushrods, .12" (3mm) prebent wire landing gear, thin wire to wrap landing gear, nylon adjustable engine mount, hardware package, decals, photo- illustrated instructions, full-size rolled plans.
Requirements
Engine: .40-.46 (6.5-7.5cc) (2-stroke)
OR .52 (8.5cc)(4-stroke)
Muffler: Engine mounts inverted, if using 4-stroke, stock muffler of engine will work fine.
Radio: 4-Channel
Servos: 4- 40 oz-in torque minimum (1-aileron, 1-elevator, 1-rudder, 1-throttle)
Servo Extension 6" (152mm) for ailerons
Covering: Four 6' rolls of MonoKote
Misc. Items: 10oz fuel tank, glow plug, �" foam rubber padding 3' medium fuel tubing, fuel filter, propeller depending on selected engine, building hardware field equipment.
Comments
The model pictured on the box is covered in Off-White with thin stripes of Red and Blue on the vertical stabilizer. To create the color scheme on the box use:
two 6-foot rolls of Cream (TOPQ0212)
one 6-foot roll of Red (TOPQ0201)
one 6-foot roll of Insignia Blue (TOPQ0207)
Decal sheet ELD4D01 sold only through GP Manufacturing includes:
Two 7�" Blue, White & Red roundels
One 3-1/8" Blue, White & Red roundel
One 3�" x 3�" Black A
One 2-3/8" x 2" Black 33
One 2�" x 1�" ownership tag
?
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more