Traxxas Remote Control Cars, Trucks, & Boats

Home : Traxxas Remote Control Cars, Trucks, & Boats

Traxxas Remote Control Cars, Trucks, & Boats

Traxxas remote control trucks, cars, and boats for sale. Buy replacement Traxxas RC parts and get back to racing on the block or track. Electric and nitro powered Traxxas vehicles are ready to run (RTR).


	Traxxas Ready-to-Race Models Parts - Traxxas Helicopters/Quadcopters Parts - Traxxas Legacy Models Parts - Traxxas Marine Models Parts - Traxxas Nitro Engines Parts - Traxxas Nitro Models Parts - 1:10 Scale Traxxas Electric Models Parts - 1:16 Scale Traxxas Electric Models Traxxas Remote Control (RC) Cars Traxxas Remote Control Boats Traxxas E-Revo 1/16 Scale Electric Remote Control Truck Traxxas E-Revo VXL Remote Control Truck W/Brushless Motor Electric Traxxas Rustler VXL Radio Control Truck W/Brushless Motor Ready To Race - 70+ MPH! Electric Traxxas XO-1 TRUE 100 Mile Per Hour Remote Control Car W/Big Block Motor Traxxas E-Maxx EVX-2 1/10 RC Electric Truck 16.8v W/Dual Motors Traxxas Rustler 1/10 Nitro RC (Remote Control) RTR W/Radio 50+ MPH! Traxxas Nitro Stampede RC Monster Truck 1/10 Scale RTR (Ready To Run) W/Radio Traxxas Bandit Extreme Electric RC (Remote Control) Buggy Remote Control High Performance Electric Race Boat Is A Blast Traxxas Spartan World's Fastest Electric RC Powerboat W/ 2 11.1v Lipo Batteries and 2 Balance Chargers Traxxas Quad-rotor Quadcopter Helicopter (RTF) Villainous Fast Outlaw Electric RC Boat W/Racing Motor Other Products Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler/Stampede) Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Caster blocks (c-hubs), 6061-T6 aluminum, left & right (red-anodized) Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Ball bearings, blue rubber sealed (4x8x3mm) (2) Ball bearings (7x17x5mm) (1)/ 12x21x5mm (1) (TRX 3.3, 2.5R, 2.5 engine bearings) Ball bearings, blue rubber sealed (20x27x4mm) (2) Ball bearings, blue rubber sealed (6x13x5mm) (2) Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Ball bearings, blue rubber sealed (12x18x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (8x16x5mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Ball bearings, blue rubber sealed (5x10x4mm) (2) Ball bearings, blue rubber sealed (5x8x2.5mm) (2) Ball bearing (1)(10x19x5mm) Ball bearings (6x12x4mm) (2) Ball bearings (10x15x4mm) (2) Ball bearings (5x11x4mm) (2) Ball bearing set: 5x11x4mm (9)/ 5x8x2.5mm (1) Ball bearings (5x11x4mm) (8) Ball bearings (5x10x4mm) (2) Ball bearings (5x8x2.5mm) (2) Ball bearings (5x8x2.5mm) (8) (for wheels only) PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) One-way starter bearing Ball Bearings, crankshaft, 9x17x5mm (front & rear) (2) Body clips (Monster Buggy, 1/5 scale) (6) Body washers, foam adhesive (10) Body clip (mounting clip), angled, 90-degrees (10) Body clips, heavy duty (12) Body clips (12) (standard size) Body washers (8) Oil, air filter Oil, differential (50K weight) Oil, differential (30K weight) Oil, differential (10K weight) Oil, differential (100K weight) (.7 oz (20cc)) Oil, differential (500K weight) Thrust bearing lube Diff lube Silicone shock oil (30 wt) Silicone grease Linkage set, throttle & brake (Jato) (includes servo horn, rod guides, brake spring, brake adjustment dial, rods (wires), throttle return spring, hardware) Pull ring (1)/ fuel tank cap (1)/ engine shut-off clamp (1)/ 3x10 BCS (1) Hanger, metal (for tuned pipe)/ 4x8 BCS (1)/ 3x10 BCS (1) Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm flanged NL (3)) Linkage set, throttle & brake, Revo-Slayer (includes servo horns, rod guides, brake spring, brake adjustment dial, brake lever, rods (wires), bellcrank, throttle return spring, hardware) Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10) Toe link, 5.0mm steel (front or rear) (2) Engine mount, aluminum/ 3x10 CS with washers (8) Bearing, needle roller (6x10x8mm) (2) Engine mount, machined 6061-T6 aluminum (blue) (w/ screws) (Maxx Series) Coupler, exhaust (silicone) Lead wire, glow plug (blue) (EZ-Start and EZ-Start 2) Hanger wire, universal (6-inches, cut and bend to suit) Exhaust tube, silicone (blue) (N. Stampede) Exhaust tube, (silicone) (N. Stampede/ N. Vee) Velcro, adhesive (3 hook/ 3 loop) Fittings, inlet (nipple) for fuel or water cooling (2) Balloons, rubber (2) Cable ties, medium (black) (6) Heat shield tubing, fiberglass (2) (black) Cable ties (small) (10) Double-sided adhesive tape (25mm x 25mm) (2) Fuel line (1 foot) Fuel line (610mm or 2ft) Water pick-up/ backing plate/ tee-fitting Wing wire Wing buttons (2)/ set screws (2)/ spacers (2)/ 3x8mm CS (2) Servo mounts (2)/ screws (6) Nuts, 4mm flanged (10) Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools Washer, 7x10x1.0 (2), 7x10x0.5 (1) black steel (shims for flywheel spacing), Washer, 5x8.2.8 brass (1) (shim for clutch bell spacing) for Revo Big Block Kit Flywheel Nut 1/4-28 thread (for big blocks w/SG shafts)/ Nuts, 2.5mm nylon locking (12) Nuts, 5mm flanged nylon locking (steel, serrated) (8) Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4) Nuts, 5mm nylon locking (8) PTFE-coated 6x8x0.5 (10) Washer, PTFE-coated 6x9.5x.5 (10) White plastic washers (5x8x1.0mm) (6) Nuts, 4mm flanged nylon locking (steel, serrated) (8) Washers, 3x6mm metal (12) Nuts, 3mm nylon locking (12) 4mm nylon wheel nuts (4) Nut set, lock nuts (3mm (11) and 4mm(7)) & washer set Nuts, 3mm flanged (12) Nuts, 4mm nylon locking (10) Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) Washers, PTFE-coated 4x6x.5mm PTFE-coated washers (5x11x.5mm) (use with oilite bushings) Bellcrank bushings (plastic) (4x7x2.5mm) (4) Oilite bushings (5x8x2.5mm) (12) Bellcrank bushings (plastic) (5x8x2.5mm) (4) Oilite bushings (5x11x4mm) (14) Oilite bushings (10) (marine drive system) Gear, 18-T pinion (48-pitch, 2.3mm shaft)/ set screw Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw Gear, 15-T pinion (48 pitch, 2.3mm shaft)/ set screw Gear, 18-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw Gear, pinion (25-tooth) (48-pitch) / set screw Gear, 22-T pinion (32-p) (mach.steel)/set screw Gear, 21-T pinion (32-p) (mach. steel)/ set screw Gear, 20-T pinion (32-p) (mach. steel)/ set screw Gear, 19-T pinion (32-p) (mach. steel)/ set screw Gear, 18-T pinion (32-p) (mach. steel)/ set screw Gear, 17-T pinion (32-p) (mach. steel)/ set screw Gear, 16-T pinion (32-p) (mach. steel)/ set screw Gear, 15-T pinion (32-p) (mach. steel)/ set screw Gear, 14-T pinion (32-p) (mach. steel)/ set screw Gear, 13-T pinion (32-p) (mach. steel)/ set screw Gear, 12-T pinion (32-p) (mach. steel)/ set screw Gear, 31-T pinion (48-pitch) / set screw Gear, 26-T pinion (48-pitch)/set screw Gear, 23-T pinion (48-pitch) / set screw Gear, 12-T pinion (32-p)/ set screw (Brass) Gear, 16-T pinion (48-pitch) / set screw Gear, 18-T pinion (48-pitch) / set screw Gear, 19-T pinion (48-pitch) / set screw Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2) Pins, axle (2.5x12mm) (4) Stub axle pins (4) Rod ends (12)/ hollow balls (12) Rod ends (GTR shocks) (6) Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2) Rod ends, small, with hollow balls (6) (for Revo steering linkage) Rod ends, Revo (large, for rear toe link only) (4) Rod ends, Revo (large) with hollow balls (12) Rod ends, short (6)/ hollow balls (6) Rod ends, long (6)/ hollow ball connectors (6) Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Screw pins, 4x13mm (with threadlock) (4) Suspension screw pin set, hardened steel (hex drive) Screw pin, 4x15mm (6) Screw pin, 2.5x18mm (6) Screw pin/ hinge pin set Screw pin set, (4-Tec) Screw pin set (Street Sport) Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit) Screw pin set Screw pin set (Tom Cat/ Spirit) Screw set, self-tapping screws (black) (Tom Cat/ Spirit) Screws, 3x12mm button-head machine (6) (starter attachment screws with Threadlock) Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo brake bolts) (6) Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6) Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6) Screws, 4x14mm button-head machine (hex drive) (6) Screws, 4x12mm button-head machine (hex drive) (6) Screws, 4x10mm button-head machine (hex drive) (6) Screws, 4x16mm button-head machine (hex drive) (6) Screws, 4x18mm button-head machine (hex drive) (6) Screws, 2.5x5mm button-head machine (hex drive) (6) Screws, 3x40mm button-head machine (hex drive) (6) Screws, 3x23mm button-head machine (hex drive) (6) Screws, 4x20mm button-head machine (hex drive) (6) Screws, 3x18mm button-head machine (hex drive) (6) Screws, 3x30mm button-head machine (hex drive) (6) Screws, 3x25mm button-head machine (hex drive) (6) Screws, 3x20mm button-head machine (hex drive) (6) Screws, 3x15mm button-head machine (hex drive) (6) Screws, 3x12mm button-head machine (hex drive) (6) Screws, 3x10mm button-head machine (hex drive) (6) Screws, 3x6mm button-head machine (hex drive) (6) Screws, 3x8mm button-head machine (hex drive) (6) Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6) Screws, 2.5x8mm cap-head machine (6) Screws, 3x32mm cap-head machine (hex drive) (6) Screws, 3x28mm cap-head machine (hex drive) (6)/ 3x6mm ELW (6) Screws, 2.5x12mm cap-head machine (6) Screws, 2.5x10mm cap-head machine (hex drive) (6) Screws, 2.5x6mm cap-head machine (hex drive) (6) Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Screws, 3x10mm cap-head machine (6) (no washer) Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5) Cylinder head bolts, marine 3x20mm CS (6) (TRX 2.5) Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX 2.5, 2.5R, 3.3) Header screws, 3x23mm cap hex screws (6) Backplate screws (3x8mm hex cap) (6)/washers (6)/ wrench Screws, 3x6mm cap-head machine (hex drive) (6) Screws, 3x36mm countersunk machine (hex drive) (6) Screws, 3x25mm countersunk machine (hex drive) (6) Screws, 3x20mm countersunk machine (hex drive) (6) Screws, 3x15mm countersunk machine (6) (hex drive) Screws, 3x12mm countersunk machine (6) (hex drive) Screws, 3x10mm countersunk machine (6) (hex drive) Screws, 3x8mm countersunk machine (6) (hex drive) Screws, 4x18mm countersunk machine (hex drive) (6) Screws, 4x15mm countersunk machine (hex drive) (6) Screws, 3x6mm countersunk machine (6) (hex drive) Screws, 4x30mm countersunk machine (hex drive) (6) Screws, 2.5x12mm countersunk machine (hex drive) (6) Screws, 2.5x8 countersunk machine (hex drive) (6) Screws, 2.5x10mm countersunk machine (hex drive) (6) Screws, 3x15mm countersunk machine (6) Screws, 3x12mm countersunk machine (6) Screws, 3x10mm countersunk machine (6) Screws, 4x15mm countersunk machine (6) Screws, 2x8mm countersunk machine (6) Screws, 3x20mm countersunk machine screws (6) Screws, 4x12mm countersunk machine (100-degree) (6) Screws, 3x12mm roundhead self-tapping (6) Screws, 3x10mm roundhead self-tapping (6) Screws, 2x6mm roundhead self-tapping (6) Screws, 2.6x10mm roundhead self-tapping (6) Screws, 4x15mm roundhead machine (6) Screws, 3x30mm roundhead machine (6) Screws, 3x25mm roundhead machine (6) Screws, 4x12mm roundhead machine (6) Screws, 3x23mm roundhead machine (6) Screws, 3x20mm roundhead machine (6) Screws, 3x15mm roundhead machine (6) Screws, 2.6x8mm roundhead machine (6) Screws, 3x12mm roundhead machine (6) Screws, 3x10mm roundhead machine (6) Screws, 3x6mm roundhead machine (6) Screws, 3x8mm roundhead self-tapping (6) Set (grub) screws, 5x6mm (6) Screws, set (grub) 4mm (6) (with threadlock) Set (grub) screws, 3x25mm (8)/ 3mm nylon locknuts (8) Set (grub) screws, 3mm hardened (12) Set (grub) screws, 3x4mm (8)/ 4x4mm (stainless) (4) Screws, 3x10mm flat-head machine (hex drive) (4) Shoulder screws 3x10 (6) (without threadlock) Shoulder screws, 3x10mm (6) (with threadlock) Screws, 3x6mm flat-head machine (hex drive) (6) Screws, 3x8mm flat-head machine (hex drive) (6) Shoulder screws, steering bellcranks (3x30mm hex cap) (2)/ draglink shoulder screws (chrome) (2) Screws, 3x15mm flat-head machine (hex drive) (6) Shoulder screws, Ultra Shocks (3x12 hex drive) (6) Attachment screws, shock (3x12mm shoulder screws) (6) Screws, 3x10mm washerhead machine (6) Screws, 3x15mm washerhead machine (6) Screws, 3x8mm washerhead machine (large head for motor mount) (6) Motor screws (3x8mm washerhead machine) (6) Screws, 3x8mm washerhead self-tapping (6) Screws, 3x15mm washerhead self-tapping (6) Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR, KO, Airtronics)) Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2) Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Wires: brake, throttle, shift/ servo horns: throttle, brake & shift; ball screw and ball cup (shift shaft) Throttle & brake rods/ brake lever Servo horn, throttle-brake/ shift (1) Spring, throttle return (2) (Nitro 4-Tec) Springs: throttle/brake/shift (3) Collars, screw (2)/ set screws, 3mm (2) Rod guides (2)/ 3mm nylon locknuts (2) Servo saver/ servo saver center link (2)/ rod ends/ tie rods (44mm turnbuckles) Servo saver w/ adapters Servo saver E-clip set for Monster Buggy E-clips, 1.5mm (24) E-clips/ C-rings Spacers, stub axle carrier (rear) Spacers, steel (Jato Twin-Spoke wheels, front) (4) Spacers, shock (3x6.5x8mm) (6) Aluminum spacers: 3x6x1.5mm (2)/ 3x6x2.5mm (1)/ 3x6x3.8mm (2) Spur gear, 55-tooth Spur gear, 50-tooth Spur gear, 45-tooth Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch) Spur gear (87-tooth) (48-pitch) w/bushing Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) Spur gear (84-tooth) (48-pitch) w/bushing Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch) Spur gear (81-tooth) (48-pitch) w/bushing Spur gear (78-tooth) (48-pitch) w/bushing Spur gear, 76-tooth (48-pitch) (for models with Torque-Control slipper clutch) Spur gear (72-Tooth) (32-pitch) w/bushing Spur gear (70-Tooth) (32-Pitch) w/bushing Spur gear, 68-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear (64-Tooth) (32-Pitch) w/bushing Spur gear (66-Tooth) (32-Pitch) w/bushing Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set, complete (hardened steel, front & rear), 3x27mm (4), 3x35mm (2), 3x52mm (4) Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) Suspension pin set, stainless steel (w/ E-clips) Suspension pins, 44mm (2) w/ E-clips Suspension pins, 48mm (2) w/ E-clips Suspension pins, 31.5mm, chrome (2) w/ E-clips (4) Suspension pins, 26mm (kingpins) (2) w/ E-clips (4) Suspension pin set, hard chrome (w/ E-clips) Wheel wrench, splined, 17mm Flat wrench, 8mm (blue-anodized aluminum) Flat wrench, 5mm (blue-anodized aluminum) Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball Multi-tool (plastic) Glow plug wrench (universal wrench) Tool Set (1.5mm &2.5mm allens/ 4-way lug, 8mm &4mm wrench & U-joint wrenches) Wheel hubs, splined, 17mm (red-anodized) (4)/ wheel nuts, splined, 17mm (red-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4) Body bumper, foam Body mounts, front (latch)/ 3x15mm BCS (2) Screws, 4x10mm countersunk machine (hex drive) (6) Antenna caps, vinyl (2)/ antenna spool Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Battery, Power Cell AA Alkaline (4) Steering blocks, 6061-T6 aluminum, left & right (red-anodized)