ARRMA AR102011 Raider Baja Buggy Yellow RTR 2.4GHz
This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run Raider Baja Buggy with Yellow Body from Arrma.
Features
ARRMA AR102011 Raider Baja Buggy Yellow RTR 2.4GHz
Chassis: Aluminum 0.08" (2mm) thick matural finish with double chassis rails and alloy front chassis plate, batteries fit under chassis-no need to remove body to change batteries
Drive: Rear wheel with steel driveshafts and axles
Motor: 15 turn brushed
Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver, transmitter can be converted for left or right hand use, seven
position adjustable steering wheel, six model memory, digital trim, servo reverse, end-point adjustment and failsafe
Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
Receiver Box: Splash and dust proof
Body: Trimmed and painted "Warp" polycarbonate Baja buggy with black
plastic rear wing
Transmission: Metal gear, brushless ready
Slipper Clutch: Machined alloy gears, adjustable for different track conditions
Differential: Metal planetary gear, oil filled
Suspension: Fully independent
Shocks: Composite body, oil-filled
Tires: dBoots Dunerunner with dBoots foam inserts
Front, 1.2" (30mm) wide, 3.3" (85mm) diameter
Rear, 1.6" (40.5mm) wide, 3.3" (85mm) diameter
Wheels: Six spoke chrome, 12mm hex
Front, 1.1" (29mm) wide, 2.2" (56mm) diameter
Rear, 1.6" (41mm) wide, 2.2" (56mm) diameter
Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank type with composite servo saver
Warranty: Two year
Specifications
Vehicle-
Length: 15.7" (400mm)
Width: 9.9" (252mm)
Height: 5.5" (140mm)
Wheelbase: 11.4" (290mm)
Ride Height: 1.2" (30mm)
Weight: 3lbs (1360g) without battery
Body-
Length: 10.1" (257mm)
Width: 4.5" (114mm) at widest point
Height: 3" (76.2mm)
Contents
RTR Raider Baja Buggy with Yellow Body and 2.4GHz Radio, ESC, Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals and Instruction Manual
Requirements
AA Batteries: Four for transmitter
Battery: 7.2V 6-cell stick NiMH or NiCd, or 7.4volt 2S LiPo (if using LiPo batteries, LiPo mode must be set on ESC)
Battery Charger: To match selected battery
Building and track equipment
Comments
For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x13mm Rear Wheels 2 ARAC3201
2 10x15mm Diff Gear 1 DTXC1595
4 5x10mm Gearbox 2 DTXC1535
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more