Associated 25352 AE Pro .28 Engine
This is the Pro .28 High-Performance Racing Engine from Associated.
Features
Associated 25352 AE Pro .28 Engine
Direct replacement engine for the Associated RC8RS buggy
Associated Pro Start (ASCP5262) compatible backplate
Slide valve carburetor
SG crankshaft
Ten fin heatsink
Specifications
Displacement: .28cu in (4.6cc)
Specs such as Bore, Stroke and Horsepower not provided by manufacturer
Distance between Mounting Hole Centers Same Side: 0.83" (21mm)
Distance between Mounting Holes Opposite Side: 1.5" (37.5mm)
Width at Mounting Tabs: 1.8" (45.5mm)
Width below Mounting Tabs: 1.3" (31.2mm)
Height/bottom of Mounting Tabs to top of Cylinder Head: 3.7" (94.5mm)
Height/bottom of Crankcase to top of Cylinder Head: 4.2" (106mm)
Distance from Backplate to Front Bearing: 2.9" (74mm)
Distance from Backplate to End of Crankshaft: 4.1" (104mm)
Carburetor Settings;
High Speed Needle: Turn clockwise until it bottoms out, then turn counterclockwise 2-3/4 turns
Low Speed Needle: Turn clockwise until it bottoms out, then turn counnterclockwise 6-1/4 turns
Idle Speed Screw: Turn until opening inside throttle valve is .030" (0.7mm)
Contents
Associated Pro .28 Engine with slide valve carburetor, pinch bolt, air filter assembly and instruction manual
Requirements
Fuel: 2-cycle glow fuel with 10%-15% nitromethane and at least 16% oil content
Glow Plug: Medium to hot heat range suitable for off-road use
Track equipment
Comments
Will not fit the Associated Nitro TC3 or GT2.
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more