Associated 610 Reedy AC/DC 4-7 Cell NiMh/NiCd Peak Charger

Associated 610 Reedy AC/DC 4-7 Cell NiMh/NiCd Peak Charger

This is the LRP 610 Reedy 447-S AC/DC Peak Battery Charger from Associated.

Features

• Associated 610 Reedy AC/DC 4-7 Cell NiMh/NiCd Peak Charger

• Charges 4-7 cell NiMH and NiCd battery packs

• Selectable charge rate of 1, 2, or 4 amps

• Peak prediction circuitry monitors battery's charge curve,calculates when the peak will occur and stops charging at that point

• LED and beeper charge status indicators

• 8-bit microchip CPU controller

• Voltmeter jacks

• Kyosho type output connector and Tamiya style connector with receiver pack charge lead adapter

• 1 amp buss fuse and 7.5 amp spade fuse protection

• Ninety day limited warranty through manufacturer beginning at date of purchase

Specifications

• Length: 6.5" (166mm)

• Width: 4" (102mm)

• Height: 2.2" (57mm)

Contents

• LRP 610 Reedy 447-S AC/DC Peak Battery Charger, AC Cord, DC Input Cord with Alligator Clips, Output Lead with Kyosho Type Connector,Tamiya Style Connector with Receiver Pack Charge Lead Adapter and Instructions

Requirements

• DC power source of 11-15V OR AC 110V AC (US Standard)

Comments

• Not for use with LiPo packs. Designed only for NiMH and NiCd batteries.

• If using automotive battery as DC power, never connect leads when vehicle is running or start vehicle with leads connected.