Associated LRP32815 ZR.30 X Competition

Associated LRP32815 ZR.30 X Competition

This is the LRP ZR.30 X Off-Road Truggy Engine.

Features

• Associated LRP32815 ZR.30 X Competition

• LRP XTEC crankcase constructed of T6 aluminum, black in color

• Aluminum body slide valve LRP XTEC carburetor with 9mm, 8.5mm and 7.5mm carb inserts

• SG (pilot) type 14.0mm/10.0mm bore triple turbo scoop crankshaft

• Lightened piston constructed of high silicium alloy

• ABC cylinder liner construction "A"lloy piston with "B"rass cylinder liner that is "C"hrome plated

• Extra strong aluminum knife-edge shaped connecting rod with double bushings

• Ninety day limited warranty (non-European countries only)

Specifications

• Displacement: .30 cu in (4.92cc)

• Exhaust: Rear, round

• Bore: 19.20mm

• Stroke: 17.00mm

• Number of Ports: 7+1 (7x transfer, 1x exhaust port)

• Power Output: 4.21 PS*

• Max RPM: 38,300*

• Weight: 12.3oz (350g)

• Distance Between Mounting Holes Same Side: 0.87" (22mm)

• Distance Between Mounting Holes Opposite Side: 1.5" (37.5mm)

• Height/Bottom of Mounting Tab/Top of Cylinder Head: 3.9" (98.5mm)

• Distance from Backplate to Front Bearing: 2.5" (64mm)

• Distance from Backplate to End of Crankshaft: 3.7" (95.5mm)

• Width at Mounting Tabs: 1.7" (43.5mm)

• Width Below Mounting Tabs: 1.2" (31.2mm)

• Diameter of Exhaust Outlet: 0.75" (19mm) including gasket

• Carburetor Settings: Mid Range, 2.25 turns from closed

• Main, 3 turns from closed

• *Power Output and Max RPM may vary depending on fuel, exhaust system and tuning

Package Contents

• LRP ZR.30 X Truggy Engine, 7.5mm, 8.5mm and 9.0mm carb inserts, glow plug, tapered cone, parts list, decals, exhaust gasket and instructions

Requirements

• Fuel with 25% nitro content, 2-stroke model car fuel

• Exhaust system depending on application, Associated Factory Team Muffler (ASCC6672) and Header (ASCC6676) recommended

• Air filter, plug wrench and track equipment

Comments

• N/A