Castle Creations Phoenix-45 45A Hi Volt Brushless ESC

Castle Creations Phoenix-45 45A Hi Volt Brushless ESC

This is the Castle Creations PHOENIX-45 High Voltage Electronic Speed Control. For use with Brushless motors only.

Features

• Castle Creations PHXHV-45 Phoenix-45 Hi Volt ESC Brushless

• Extremely Low Resistance (.003 Ohm)

• High rate adjustable switching

• Up to 45A max continuous current

• Dual Opto-Coupled (No BEC)

• Up to 36 cells or 12S Lithium Polymer - Maximum

• 16 cells or 3S Lithium Polymer - Minimum

• 13AWG wiring for motor and battery leads

• Dynamic braking ensures folding props fold promptly

• User Programmable Features:

• -Low-voltage cutoff with Auto-LiPo detect as default

• -Over-current Protection

• -Brake Type

• -Throttle Range - Fixed/Self-Adjusting/Governor

• -Timing Advance

• -Cutoff Type

• -Soft Start Ramp Up

• -Switching Frequency

• Runs motor in forward OR reverse

• Overtemp Motor Cutoff with Reset

• Safe "Power On" arming program ensures motor will not accidentally turn ON

• Low torque "soft start" prevents damage to fragile gearboxes

• Auto Shut Down when signal is lost or because radio interference

Specifications

• Speed control body length: 2.6" (66mm)

• Speed control body width: 1" (25.4mm)

• Speed control body thickness: .5" (13mm)

• Motor wire lead length: 4.8" (122mm)

• Battery wire lead length: 6" (152mm)

• Servo wire lead length: 11" (280mm)

• Continuous current: 45A

• Up to 36 cells or 12S Lithium Polymer: Maximum

• 16 cells or 3S Lithium Polymer: Minimum

• Wire size for motor and battery leads: 13AWG

Package Contents

• One PHOENIX-45 High Voltage speed control w/Universal connector

• One set of instructions

• One small "Castle Creations" decal

Requirements

• Bullet-type motor connectors.

• Suggested Connectors: 3.5mm (GPMM3112 GPMM3113)

• Battery Connectors - depends which connector is used on battery.

• Suggested Connectors: Ultra plugs (WSDM3001)

Comments

• This speed control does NOT feature BEC. You must use an alternate power source for your receiver and servos.