Custom Works 0928 Enforcer GSX2 Kit
This is the nitro powered, radio controlled 2WD Custom Works Enforcer GSX2 Dirt Oval Racer Kit.
Features
Custom Works 0928 Enforcer GSX2 Kit
Chassis: High strength, carbon fiber construction (4mm thick)
Roll Cage: Injection molded nylon construction, white in color
Body: Four clear Lexan panels
Shocks: Four coil-over large volume with threaded, anodized blue aluminum bodies (50wt shock oil included)
Shock Towers: High strength, carbon fiber construction, adjustable rear tower allows easy adjustment od car width and ride height
Transmission: Racing GT type, single speed with 2.60 ratio
Fuel Tank: 2.5oz (75cc) with flip top cap
Clutch: Two shoe
Clutch Bell: Steel construction with 23 tooth aluminum pinion
Spur Gear: 66 tooth, 32 pitch
Differential: Ball type
Steering: Rack type with links
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Specifications
Dimensions and weight not provided by manufacturer
Transmission Ratio: 2.60:1
Contents
Custom Works Enforcer GSX2 Dirt Oval Racer Kit, lexan body panels, wing, side dams, braces and mounting brackets, 2.5oz (75cc) fuel tank, 23 tooth bell pinion, 60 tooth spur gear and instruction
manual
Requirements
Engine: .12 cu in rear exhaust, slide valve (clutch parts for either a threaded shaft or pilot shaft type engine are included)
Exhaust: Header and Tuned Pipe
Tires: Street track design, CSWC6204 front and CSWC6214 rear
Wheels: Black nylon dish design CSWC6252 front and CSWC6253 rear
Radio: 2-channel with 2 standard size servos
Radio Batteries: Eight AA cells
Receiver Battery: 5-cell rechargeable
Comments
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
4 3/16x3/8" Front wheels DTXC1423 2
4 3/16x3/8" Rear Hubs DTXC1423 2
2 5/32x5/16" Diff gear and outdrive DTXC1411 1
4 3/16x3/8" Gearbox DTXC1437 2
2 3/8x5/8" Gearbox DTXC1437 1
1 5x10mm Clutch Bell Inner Bearing DTXC1541 1
1 3/16x3/8" Clutch Bell Outer Flanged Bearing CSWC4439 1
The use of a remote glow plug kit is suggested (MODP1221). Without
the use of this kit the wing will have to be removed for access to
the glow plug.
?
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more