Duratrax G-27CS Racing Engine Super Start Ready DTXG0257
This is the DuraTrax/SuperTigre G-27CS Super Start Ready Racing Engine for the DuraTrax Warhead Evo and the Raze Truggy.
Features
Duratrax G-27CS Racing Engine Super Start Ready DTXG0257
Pre-installed back plate and nut for DuraTrax Super Start operation
ABC cylinder construction-"A"luminum piston,"B"rass cylinder liner that is "C"hrome plated
Dual ball bearing-supported SG (pilot) style crankshaft
Dual needle Slide Valve Carburetor
Machined aluminum blue cylinder head
Rear exhaust
Three year limited warranty
Specifications
Displacement: .27 cu in (4.4cc)
Bore: .72 in (18.2mm)
Stroke: .67 in (17mm)
Horsepower: 2.5 hp at 30,000 RPM
Practical RPM Range: 3,000-35,000
Weight: 14.1oz (400g)
Distance Between Mounting Holes Same Side: .83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Height from Bottom of Mounting Tabs/Top of Cylinder Head: 3.6" (92mm)
Height from Bottom of Crankcase to Top of Cylinder Head: 4.2" (107mm)
Width at Mounting Tabs: 1.8" (46mm)
Distance from Pull Start to Front Bearing: 3.3" (84.5mm)
Distance from Pull Start to End of Crankshaft: 3.9" (99mm)
Diameter of Exhaust Opening: .59" (15mm)
Diameter of Carburetor Opening: .56" (14.2mm)
Factory Needle Settings:
High Speed Needle: 4.5 turns OUT from closed
Low Speed Needle: 12.5 turns OUT from closed (1 turn IN from flush with ball link body)
Contents
DuraTrax/SuperTigre G-27CS Super Start Ready Racing Engine with glow plug
Requirements
DuraTrax Kwik-Pit Super Start (DTXP6001)
Fuel: Car fuel blend with 20% nitromethane content
Glow starter, plug wrench and track equipment
Comments
This engine is intended for use in the DuraTrax Warhead EVO and the Raze Truggy and does not include an instruction manual. Refer to engine installation and maintenance sections in their manuals.
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more