Duratrax Micro Failsafe Unit DTXM4000

Duratrax Micro Failsafe Unit DTXM4000

This is the Micro Duratrax Failsafe Unit.

Features

• Duratrax Micro Failsafe Unit DTXM4000

• Prevents runaway nitro or gasoline powered vehicles

• Operates with both 4.8 and 6V batteries

• Protects against low receiver battery power below 3.8V and loss of radio frequency

• Universal male and female plugs are compatible with Futaba, JR, Hitec and Airtronics Z radio systems, see COMMENTS below

Specifications

• Length: 0.92" (23.5mm)

• Width: 0.67" (17mm)

• Thickness: 0.23" (5.8mm)

• Weight: 0.18oz (5g) approximate

• Length of Wires: 2.75" (70mm) approximate

Contents

• One Duratrax Failsafe Unit with universal male and female plugs

Requirements

• Use of NiCD or NiMH batteries, do NOT use ALKALINES

• Connecting between receiver and throttle servo

Comments

• Be certain radio system uses center red positive receiver/servo connections.

• Set-up:

• 1. Turn on your transmitter and power to your receiver.

• 2. From your transmitter throttle, set the amount of brake you would like applied to the throttle/brake servo when Failsafe is activated from loss of signal or battery power.

• 3. While holding this throttle position from your transmitter, push and hold the "set" button on the Failsafe for 2 seconds until the red LED is illuminated. The Failsafe position is the same for both battery and signal Failsafe.

• This is only for AM and FM systems