Futaba 2.4GHz R6014HS Rx/TM-14 Module FASST FUTL8957

Futaba 2.4GHz R6014HS Rx/TM-14 Module FASST FUTL8957

This is the Futaba 2.4GHz TM-14 Module and the R6014HS 14-Channel 2.4GHz Receiver for Aircraft Models. This module is compatible only with Futaba 14MZ, 12Z and 12FG systems which utilize the United States region code. If your transmitter does not utilize this region code, the TM-14 module may not be compatible with your transmitter.

Features

• Futaba 2.4GHz R6014HS Rx/TM-14 Module FASST FUTL8957

• TM-14 Module; (FUTL8934)

• Compatible with the Futaba 14MZ, 12Z and 12FG systems

• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed

• Simple plug-in installation-no transmitter modifications needed

• Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up

• R6014HS Receiver; (FUTL7645)

• Simple one-touch binding - no plugs to mess with or lose

• A full range system for all aircraft from giant scale to Park Flyer applications-no need to buy separate receiver for specific aircraft

• Two operation modes; Normal, frame rate of 14ms accepts any type of servos and High Speed with a frame rate of 7ms for digital servos including the Futaba BLS servos

• High Speed on channels 1 through 6.

• Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter selects the best reception between the two receiver antennas with no signal loss

• Rubber grommets installed where antennas exit eliminates stress and fraying of the two antenna wires

• Two year limited warranty through manufacturer beginning at date of purchase

Specifications

• TM-14 Module;

• Communication Method: One-way operation system

• Transmission Antenna: Mono-pole

• R6014HS Receiver:

• Power Requirement: 4.8 - 6V

• Dimensions: 1.48 x 2.05 x 0.63" (37.6 x 52 x 15.9mm)

• Weight: 0.76oz (21.5g)

Package Contents

• Futaba 2.4GHz Module, R6014HS Receiver, small Screwdriver and Manual

Requirements

• Installing module in transmitter and installing receiver in aircraft

• Memory Card: The Compact Flash Memory Card is included with the 14MZ and can also be used with the 12Z. Also, a CF memory card can be purchased from an electronics store

• The 12FG system requires an SD memory card which is not carried and must be purchased separately

Comments

• The software of the 50MHz and 72MHz 12FG, 12Z and 14MZ systems must be updated prior to installing this module.

• The software is available free of charge on the Futaba Flyer's Club website www.14mz.com/forum/ and also on www.2.4gigahertz.com.