Futaba FASSTPAK-S R603FF 2-S3010 Surface FUTL1121

Futaba FASSTPAK-S R603FF 2-S3010 Surface FUTL1121

This is the Futaba FASSTPAK-S with the R603FS Receiver and two S3010 Standard High-Torque Servos. **Compatible only with Futaba 2.4GHz FASST radio systems.**

Features

• Futaba FASSTPAK-S R603FF 2-S3010 Surface FUTL1121

• Designed for modelers who want to use a single radio transmitter to operate more than one R/C vehicle

• One year limited warranty

Specifications

• Receiver-

• Reception Antenna: Diversity type (internal and external)

• Power Requirement: 6V NiCd battery

• DSC Function Available

• Size: 1.5 x 1 x .55" (39 x 26 x 14mm)

• Weight .50oz (14.1g)

• Servos-

• Speed: .20 sec/60� @ 4.8V and .16 sec/60� @ 6.0V

• Torque: 72 oz-in @ 4.8V and 90 oz-in @ 6V

• 5.2 kg-cm @ 4.8V and 6.5 kg-cm @ 6V

• Length not including mounting flanges: 1.6" (40mm)

• Length at center of mounting holes: 1.9" (49.5mm)

• Width total: 0.8" (20mm)

• Width at center of mounting holes: 0.40" (10mm)

• Height not including servo horn: 1.5" (38mm)

• Weight: 1.4oz (41g)

Contents

• R603FS 3-channel Receiver, FUTL7630

• Two S3010 Standard High-Torque Servos, FUTM0043

• Two 0.82" (20.9mm) diameter Round Horns

• Two 1.4" (35mm) diameter Round Horns

• Two 1.2" (32mm) diameter six point Horns

• Two 1.5" (38.5mm) diameter four point Horns

• Servo grommets and eyelets and mounting screws

• On/Off Switch, FUTM4350 (mounting plate & hardware not included)

Requirements

• Installing in aircraft

Comments

• FASSTPAK systems for surface use are available in the following configurations;

• FUTL1120 R603FF Receiver, 2-S3004 Servos

• FUTL1121 R603FF Receiver, 2-S3010 Servos

• FUTL1130 R603FS Receiver, 1-S9452 Servo

• FUTL1131 R603FS Receiver, 1-S9350 Servo

• FUTL1132 R603FS Receiver, 1-BLS451 Servo

• FUTL1133 R603FS Receiver, 1-BLS452 Servo

• FUTL1140 R603FS Receiver, 2-S9351 Servos

• FUTL1141 R603FS Receiver, 2-BLS351 Servos

• FUTL1143 R603FS Receiver, 1-BLS352 Servo and one BLS351 Servo