Futaba S148 Servo Standard Precision FUTM0710

Futaba S148 Servo Standard Precision FUTM0710

Futaba S148 Standard Servo yields increased power and speed with a reduced size and weight compared to the S128, yet uses the same gears and servo cases.

This servo is a replacement for the following servos.(S6,S17,S18,S23,S26,S28,S38,S128)

This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
?

Features

• Futaba S148 Servo Standard Precision FUTM0710

• Two Ball Bearings

• Nylon Gear Set

• 3-pole motor

• Compact Size

• Travels 180� - full-lock to full-lock -- to hold your gear in position securely. Not proportional. Perfect for mechanical
  retract installation. (see COMMENTS)

• One-Year Warranty

Specifications

• Control system: Pulse width control, 1.52ms neutral

• Motor: 3-pole

• Power requirement: 4.8V or 6V (from receiver)

• Power consumption: 6V 8mA (at idle)

• Torque: 33.3 oz-in @ 4.8V or 41.6 oz-in @ 6V (2.4 kg-cm @ 4.8V or 3 kg-cm @ 6V)

• Transit Time: .28 sec/60� @ 4.8V or .22 sec/60� @ 6V

• Length: 1.6" (41mm)

• Width: .8" (20mm)

• Height: 1.4" (36mm)

• Weight: 1.6oz (44.4g)

• Mounting on-center dimensions -Width: .4" Length: 1.9" Shaft Diameter: 5.88mm

Package Contents

• Futaba S148 Standard Precision Servo w/"J" connector and metal top bushing

• One accessory package with round rubber grommets, brass eyelets, mounting screws, round and star shaped servo horn Nylon gears

• One year warranty