Great Planes C-25 Mini Brushed ESC w/BEC GPMM2025

Great Planes C-25 Mini Brushed ESC w/BEC GPMM2025

This is the C-25 Mini High Frequency Electronic Speed Control w/BEC. For small to medium size electric aircraft with 400 size and some 500 and 600 size Brushed Motors requiring 25A or less.

Features

• Great Planes C-25 Mini Brushed ESC w/BEC GPMM2025

• Compact size to minimize weight and simplify installation

• Programmable battery types

• Programmable brake

• Pushbutton, twin LEDs and audible tones for easy set-up ON/OFF switch and LEDs on an externally mountable lead

• Automatic temperature protection reduces max. throttle to 70% when max. temperature is reached.

• Very smooth throttle response

• "Safe-Start" system prevents accidental motor starts by disabling the motor circuitry until the throttle stick is moved to full throttle, then to the OFF position

• Factory installed radio, motor and battery connectors

• Fully proportional forward only with programmable brake

• Battery Eliminator Circuitry provides sufficient power for the receiver and two standard servos. The motor battery powers the receiver and servos, then when voltage is reduced to the appropriate voltage the Low Voltage cut-off circuitry stops motor while continuing to supply power to the receiver and servos

• High frequency to optimize battery run-time and cool operation

• Pushbutton twin LEDs and audible tones for easy set-up

• 180 day limited warranty

Specifications

• Length: .98" (25mm)

• Height .43" (11mm)

• Width: .71" (18mm)

• Weight: .85oz (24.1g) with wires

• Input: 6-10 NiCd/NiMH cells; 2-3 LiPo cells

• Max Rated Current: 25A continuous

• BEC Voltage: 5V/1.5A

• Low Voltage Cutoff: .80V per cell for NiCd/NiMH

• 2.75V per cell for LiPo

• Connectors: Receiver lead- Universal Battery lead- Deans Ultra male Motor Connector- 3.5mm gold plated female bullet connectors

• Switching Frequency: 1.3kHz

• Motor Size: 400 (and some 500 & 600 size) Brushed only

Contents

• One C-25 Mini Electronic Speed Control with Deans Ultra Male Connector for battery, 3.5mm gold plated Female Bullet motor Connectors and Universal receiver connector One instruction sheet

Requirements

• Attaching to motor and setting up speed control

• Battery pack

• Plug Universal plug into the throttle channel on the receiver

Comments

• Will handle 2 standard servos

• Do NOT use with Brushless Motors