Great Planes Dynaflite Super Decathlon Giant Scale Kit GPMA0510

Great Planes Dynaflite Super Decathlon Giant Scale Kit GPMA0510

Dynaflite's Super Decathlon is an Easy to Build and Fly, High-Wing Airplane. This is for the Intermediate Modeler Making a Good 3rd or 4th Kit. This Fun Scale Kit Is An Ideal Way To Get Into Building and Flying Large Aircraft Through Loops, Rolls and Spins.

Features

• Great Planes Dynaflite Super Decathlon Giant Scale Kit GPMA0510

• IMAA and IMAC Legal (see COMMENTS) with a 89" Wingspan

• Crisp Die-Cutting For The All-Wood Parts Ensure Good Fits and Fast Assembly.

• Builds As Easily As Most .40 Size Sport Scale Kits, With A Mixture

• Of Sport-Scale and Giant-Scale Building Techniques.

• Three-Piece ABS Cowl and Wheel Pants Add Authentic Contours With

• Minimal Shaping Work.

• Lightweight and Able to Fly With A Wide Range Of Engines

• Two-Piece Wing Design Using An Aluminum Wing Tube

• Semi-Symmetrical Selig 8036 Airfoil That Supports Excellent

• Aerobatics As Easily As Stable Low-Speed Handling.

• A Servo Compartment Near the Tail For Use In Counterbalancing Heavy Engines.

• A 25cc Gasoline Engine Provides More Than Enough Power for Exciting Aerobatics.

• An Authentically Shaped Built-Up Tail Section Made By Laminating

• Five Layers of 1/16" Balsa, Making It Strong But Light Weight.

• Fully functional, structural wing struts (req'd esp if cloth covered)

Specifications

• Wingspan: 89" (2261mm) Wing Area: 1237 sq in (80 sq dm)

• Weight: 16-18lbs (7258-8165g) Wing Loading: 30-33 oz/sq ft

• Length: 69" (1753mm) Airfoil: Semi-Symmetrical High-Wing

• Center Of Gravity: 3-3/8" Back From Leading Edge Of The Wing

• Control Throws: High Rate Low Rate

• Ailerons: Up & Down 1�" 5/8"

• Elevator: Up & Down 1�" 1"

• Rudder: Left & Right 1�" 1"

• Cowling: Length, Firewall To Front: 6-3/8"

• Height, Rear At Firewall: 7-7/8"

• Height At Front: 5-3/4"

• Width At Rear: 6-3/8"

• Width At Front: 6-1/8"

• Engine Down Thrust: 5�

• Engine Right Thrust: 2�

• Wing Incidence: -2�

• Stab Incidence: -3.5�

Package Contents

• All The Wood To Build The Kit, ABS Cowling and Wheel Pants, Hardware Package, Clear Windscreen, Pre-Formed 3/16" Aluminum Landing Gear, Full Sized Rolled Plans, Photo-Illustrated Instruction Manual, Paper/Aluminum Wing Tube, Nylon Strut Ends, Tailwheel Mounting Assembly.

Requirements

• N/A

Comments

• In Order For This Kit To Be IMAA Legal, The Plane MUST Have: 5 High Torque Servos (More Than 45 oz-in Torque) For Control Surfaces (Standard Servo For The Throttle), Heavy Duty Control Horns, and Heavy Duty Hinges.

• If Using a 25cc Gasoline Engine, Modeler Will Also Need To Use Two 24" Servo Extension Wires (Because the Rudder and Elevator Servos Will Be Mounted In The Tail Section). With This Engine You Will Also Need Approx. 6oz of Extra Tail Weight.

• For Gasoline Engine, Use Gas Fuel Tubing GPMQ4135 and Gas-Safe Tanks (GP big tanks are.) ALSO USE servo operated KILL SWITCH FOR SAFETYY.

• There are no decals included with this kit