Great Planes E-Performance Series 3D Reactor Bipe ARF GPMA1580

Great Planes E-Performance Series 3D Reactor Bipe ARF GPMA1580

This is the radio controlled, electric powered almost-ready-to-flyo-fly Great Planes ElectriFly E-Performance Reactor Bipe Sport Aerobat Airplane. Ideal for 3D and Pattern Fliers.

Features

• Great Planes E-Performance Series 3D Reactor Bipe ARF GPMA1580

• Construction: Laser cut balsa and ply

• Wings: Balsa and plywood construction with ailerons on both wings with front and rear joiners

• Covering: Factory applied Top Flite MonoKote (see comments for color)

• Cowl: Factory painted fiberglass construction

• Canopy: Tinted polycarbonate construction with silver trim

• Battery Port: Located on underside of nose, hook and loop strap holds battery in place and allows fast and easy changes

• Spinner: 1.5" (37mm) diameter white plastic construction

• Landing Gear: Factory painted composite construction

• Wheels: 1.75" diameter

• Wheel Pants: Factory painted fiberglass construction

• Aileron Control: Dual servo

• Carbon fiber pushrods

• Composite nylon control horns and servo arms

• Decals: Die-cut and ready to peel and stick

• Laser cut plywood CG balancer for easy model balancing

• Building Time: Ready to fly in 4-6 hours

• Warranty: Great Planes Model Manufacturing Company guarantees thiss, kit free from defects in both materials and workmanship at the date of purchase.

Specifications

• Wingspan: 35" (890mm)

• Wing Area: 600 sq in (38.7sq dm)

• Weight: 34.2 - 38.2oz (970 - 1085g)

• Wing Loading: 8.2 - 9.1 oz/sq ft (25 - 28 g/sq dm)

• Length: 43" (1080mm)

• Airfoil: Fully Symmetrical

• Center of Gravity: 3-7/16" (87.5mm) back from the leading edge of the bottom side of the top wing measured at the fuselage

• Control Throws- High Rate Low Rate 3D

• Elevator: Up & Down 9/16" (14mm) 5/16" (8mm) 1-1/4" (30mm)

• Rudder: Right to Left 2-1/4" (57mm) 1-3/16" (30mm) 3-3/8" (87mm)

• Ailerons: Up & Down 3/4" (20mm) 3/8" (10mm) 1-1/8" (28mm)

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, fiberglass cowl, wheel pants, molded composite main gear, 1.6" (41mm) diameter foam main wheels, 1.5"(37mm) diameter spinner, hardware package and photo-illustrated instructions

Requirements

• N/A

Comments

• Following are the colors of Top Flite MonoKote used to cover this  model and order numbers for six foot rolls; Jet White, TOPQ0204 Metallic Teal, TOPQ0409 Metallic Plum, TOPQ0403 Metallic Platinum, TOPQ0408