Great Planes Edge 540 E-Performance Series 3D ARF GPMA1550

Great Planes Edge 540 E-Performance Series 3D ARF GPMA1550

This is the electric powered, radio controlled, almost ready to fly ElectriFly Edge 540 3D Aerobatic Airplane. This Edge 540 3D is part of the ElectriFly E-Performance Series. For intermediate to experienced flyers 14 years of age and older.

Features

• Great Planes Edge 540 E-Performance Series 3D ARF GPMA1550

• Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled

• Wings: Two piece with carbon fiber wing joiner and single screw attachment

• Motor Mount: Built-up plywood

• Covering: Top Flite MonoKote

• Aileron Control: Dual servo

• Cowl: Prepainted fiberglass, attaches with rare earth magnets

• Canopy: Clear, single

• Wheel Pants: Prepainted ABS

• Landing Gear: Prepainted aluminum 0.079" (2mm) thick

• Wheels: Two foam 1.75" (44mm) diameter

• Spinner: Red plastic, 1.75" (44mm) diameter

• Hardware: Full set included

• Building Time: Approximately 4-6 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase.

Specifications

• Wingspan: 41" (1040mm)

• Wing Area: 353 sq in (22.9 sq dm)

• Weight: 29 - 32.0 oz (820 - 910g)

• Airfoil: Fully symmetrical, mid wing placement

• Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)

• Length: 39.5" (1005mm)

• Center of Gravity: 2-1/2" (64mm) back from the leading edge of the wing at the side of the fuselage

• Control Throws- Low Rate High Rate 3D

• Elevator: 1/2" (13mm) 8� 1-1/8" (29mm) 19� 2-1/4" (57mm)40�

• Rudder: 2" (51mm) 19� 2-3/4" (70mm) 27� 3-3/4" (94mm)39�

• Ailerons: 5/8" (16mm) 11� 1-1/8" (29mm) 20� 1-3/4" (44mm)33�

Contents

• ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl, ABS wheel pants, landing gear, wheels, hardware, photo-illustrated instruction manual and two decal sheets

Requirements

• Radio: 4 channel

• Servos: 4-micro

• Dual Servo Extension: For aileron servos

• 6" (150mm) Slim Extension Wire: Two

• 16" (400mm) Servo Extension: Two

• Motor: Rimfire 35-30-1250 outrunner

• 35A ESC for Brushless Motors:

• Battery: LiPo 1500mAh 11.1V

• Cell Balancer: For LiPo battery,

• Battery Charger: LiPo compatible

• Propeller: 10x7E

Comments

• Following are the MonoKote colors used on this model and stock numbers for six foot rolls;

• Metallic Blue TOPQ0402 Missile Red TOPQ0201 Yellow TOPQ0203 White TOPQ0204