Great Planes ElectriFly Rifle Sport/Racer EP ARF GPMA1805

Great Planes ElectriFly Rifle Sport/Racer EP ARF GPMA1805

This is the radio controlled, electric powered, almost ready to fly Great Planes ElectriFly Rifle Sport Airplane.

**For advanced pilots only, not suitable for beginning or intermediate pilots**

**The Rifle reaches speeds approaching 100mph (161kph)**

**and should be flown only at an approved AMA flying site.**

**Because it can quickly disappear from sight, pilots should**

**remain focused on the plane at all times.**

Features

• Great Planes ElectriFly Rifle Sport/Racer EP ARF GPMA1805

• Construction: Fiberglass

• Wing: One-piece, "live hinge" aileron control surface for maximum control and minimum deflection drag, wing bolts into place and aligns automatically

• Aileron Control: Single servo

• Landing Gear: Two wing skids and one fuselage skid

• Radio Compartment: Accessible under wing

• Spinner: Machined aluminum 1.2" (30mm) diameter

• Building Time: Ready to fly in 1-2 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase.

Specifications

• Wingspan: 31" (785mm)

• Length: 24.5" (620mm)

• Wing Area: 112 sq in (7.2 sq dm)

• Wing Loading: 21.9 - 23.1oz/sq ft (67 - 70g/sq dm)

• Weight: 17 - 18oz (480 - 510g)

• Center of Gravity (CG): 11/16" (17mm) back from the leading edge of the wing measured at the fuselage using the included balancing stand

• Control Throws          High Rate           Low Rate

• Elevator-Up/Down,     3/16" (5mm)      13� 3/32" (2mm) 7�

• Ailerons-Up/Down,     3/16" (5mm)      11� 1/8" (3mm) 7�

Contents

• Great Planes ElectriFly Rifle Sport Airplane with landing skids, plywood balancing stand, decals, spinner and instruction manual

Requirements

• Radio: 3-channel with micro receiver

• Servos: Two nano size (1-aileron, 1-elevator), for best precision flight, digital high-speed servos such as the Futaba S3155

• (FUTM0655) should be used

• ESC: 25A brushless compatible

• Motor: Inrunner Brushless (ElectriFly Ammo 24-33-3180kV Inrunner recommended, GPMG5155)

• Battery: 11.1V (3S) 1500mAh 25C LiPo

• Battery Charger: LiPo compatible

• Propeller: 4.75 x 4.75

• Building and Field Equipment