Great Planes Glo-Bee Intellitach Digital Tachometer GPMP2500

Great Planes Glo-Bee Intellitach Digital Tachometer GPMP2500

This is a Multi-Blade (2,3,4-blade) Digital IntelliTach Tachometer. *Additional Technical Information Will Be Added As It Becomes Available.** Some Important Differences Added to the IntelliTach over the standard Tach are: Improved optics and sensor. A digital microprocessor that safeguards accuracy and provides several nice functions like: It can be set to automatically read the type of prop you use most, whether it is a 2-, 3- or 4-blade style. It "remembers" the last three readings, so you don't have to. It shuts itself OFF after 5 minutes to save power. More LCD display flips up to a comfortable reading angle.

Features

• Great Planes Glo-Bee Intellitach Digital Tachometer GPMP2500

• 0 - 32,000 RPM operating range readout is highly visible in large 1/2" (13mm), 5-digit LCD display.

• Measures RPM for peak engine performance up to 12" (305mm) from the propeller, and still gets readings accurate to the nearest 10 rpm.

• One-button operation to select among 2-, 3-, and 4-bladed props with prop selection indicator on left side of the display.

Specifications

• Length: 4-7/8" (125mm) Width: 2-7/8" (73mm) Thickness: 7/8" (22mm)

Package Contents

• One Digital IntelliTach Tachometer

• One 9V alkaline battery

Requirements

• 220 grit sandpaper (GPMR6185)

• Wood glue (GPMR6160)

• Scissors to cut foam tubing

• CA glue (GPMR6001) to attach foam tubing

• Paint or stain if desired

Comments

• Because of its sensitivity, the unit does not know whether it is looking at a propeller or an incandescent or fluorescent light, which typically strobes at 60 cycles per second or 3600 cycles per minute. When set for 2-blades it will read 360 or 3600, 3-blades: 240 or 2400 and 4-blades: 180 or 1800. This is a quick way to test the calibration. In direct sunlight this will read zero when turned ON.