Great Planes P-47 Thunderbolt .25 GP/EP ARF GPMA1479
This is the radio controlled, glow or electric powered, almost-ready-to-fly, Great Planes P-47 Thunderbolt .25 GP/EP Sport Scale Airplane. For intermediate modeler/flyers.
Features
Great Planes P-47 Thunderbolt .25 GP/EP ARF GPMA1479
Construction: All balsa and plywood with fiberglass belly scoop that allows air to pass through fuselage
Controls: Throttle, ailerons, elevator, rudder
Wings: One-piece with plywood wing joiner
Covering: Factory applied Top Flite MonoKote
Cowling: Pre-painted, fiberglass
Canopy: Clear, single
Aileron Control: Modeler's choice of single or dual servo control
Landing Gear: Prebent wire 0.12" (3mm) diameter, Lexan belly is provided as a skid for belly landings if landing gear is not desired
Wheels: Two 2" (49.75mm) foam tires
Building Time: Ready to fly in 6-8 hours
Fuel Tank: 4oz (120cc)
Engine Mount: Plywood mount for Rimfire use
Two piece composite for Glow use (GPMA2827)
Warranty Period: Great Planes guarantees this kit free from defects in both material and workmanship at the date of purchase.
Specifications
Wingspan: 39.5 (1005mm)
Wing Area: 290sq in (18.7sq dm)
Flying Weight: 41 - 45oz (1160 - 1275g)
Wing Loading: 20.4 - 22.3 oz sq/ft (62 - 68 g/sq dm)
Length: 34" (865mm)
Center of Gravity: 2-1/4" (57mm) Back from the wing's leading edge at the fuselage
Control Throws- High Rate Low Rate
Elevator: Up & Down 3/8" (9.5mm) 15/64" (6mm)
Rudder: Up & Down 1" (25.4mm) 11/16" (17.5mm)
Ailerons: Up & Down 13/64" (5.2mm) 1/8" (3.2mm)
Contents
One Great Planes Thunderbolt .25 GP/EP sport airplane with pre-built and covered wings, fuselage and tail assemblies, pushrods, wood servo trays and wing joiners, two wheels, mounting components for electric/glow setup and photo illustrated instructions
Requirements
Glow Engine: .25 cu in (4.0 cc) 2-stroke (OSMG0525) OR Brushless Motor: Outrunner type
Electronic Speed Control: At least 45A, Brushless-compatible (GPMM1840) if using Brushless motor
Propeller: Glow: APC 9x6 Sport Propeller (APCQ0906)
Rimfire: APC 9x6 Thin Electric Propeller (APCQ4118)
Radio: 4-Channel (FUTJ36**)
Servos: 4 or 5 Futaba S3115 Micro Servos (FUTM0415)
Servo Extensions: Two 9" (229mm) Servo Extensions (FUTM3910)
If using an electric motor, One 6" (152mm) Servo Extension (HCAM2000) will be needed
If using a radio system that does not support mixing functions, a Y-Harness will be required to connect the aileron servos to the receiver (FUTM4130)
Misc. Items: Building and field equipment
Comments
N/A
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more