This is a Hot-Shot #2 Standard Glo-Starter with Battery Charger. This is used to heat glow plugs while starting glow-powered engines.
Hobbico Hot-Shot 2 Standard Sanyo 1500mah NiCd HCAP2520
Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model.
Pre-Installed Genuine Sanyo Sub-C battery cell
Included AC battery charger with hex-shaped charge end recharges the glow starter in 10 hours. A Red LED glows when unit is Charging.
Removable Red rubber socket cap prevents shorting and any dirt or dust debris from entering into the the shaft.
One Year Limited Warranty USA and Canada only
Sanyo Sub-C NiCd Battery: 1500mAh, 1.2V
AC Charger- Input: 110-120V AC 60Hz (US Standard) Output: 1.25V DC 150mA
Hot Shot- Overall Length: 4" (102mm) Shaft Length: 2-1/4" (57mm)
Diameter: 15/16" (24mm)
One Hot Shot #2 Standard Glo-Starter w/Red rubber protective cap
One Hot Shot #2 Glo-Starter Battery Charger
One Instruction/Header Card
How to use: To lock onto your engine's glow plug, place the end of the Hot Shot 2 over the plug and push down. Twist the Hot Shot 2 clockwise and it locks into place.
Charging: Before using, initial charge should be 12 to 14 hours Subsequent charging time is approximately 10 hours
For Hot Shot #2 Long version use HCAP2522
For Super Hot Shot #2 version use HCAP2528
*********The Charger originally packaged with this Glo-Starter had a 150mAh charge rate which takes a long time to charge the large mAh battery. The customer charges the battery initially for 12 hours; 24 hours if they are regular fliers.