HPI 15180 Nitro Star T-15L Engine w/PS
This is the HPI Nitro Star T-15L Glow Engine with Pullstarter.
Features
HPI 15180 Nitro Star T-15L Engine w/PS
Fits any glow powered car or truck that accepts small block
(.12-.15) size engines with pull starters
ABC piston and liner construction "A"luminum piston with a "B"rass cylinder liner that is "C"hrome plated
5.5mm rotary carburetor
HPI R4 medium cold glow plug
Standard crankshaft
Side exhaust
Compatible with the HPI Roto Start 2 Electric Starter System, HPIP7132
Two year limited warranty through HPI beginning at date of purchase
Specifications
Displacement: 0.15 cu in (2.49cc)
Bore and Stroke: 15.0 x 13.6mm
Maximum Power: 1.2hp/29,000 RPM
Height from Crankcase Bottom/top of Cylinder Head: 3.9" (98.7mm)
Distance/Mounting Tab to Exhaust Mounting Hole Center: 1.4" (36.2mm)
Distance/Starter to Front Bearing: 2.7" (70.1mm)
Mounting Hole Centers Opposite Side: 1.2" (31mm)
Mounting Hole Centers Same Side: 0.43" (11mm)
Width at Mounting Tabs: 1.6" (40mm)
Front Mounting Hole Center to Front Bearing: 1.2" (29.5mm)
Center of Carburetor to Center of Crankshaft: 0.97" (24.7mm)
Cylinder Head Diameter: 1.9" (49mm)
Crankshaft Size: UNF 1/4-28
Carburetor Settings:
**High and low speed needles are factory set and not recommended to**
**be changed**
High Speed Needle: Flush with carb body
Low Speed Needle: Flush with carb body, turn needle in 1/8 turn increments to adjust-no more than two turns from flush
Idle Adjustment Screw: Set so that clutch does not engage, turn counter clockwise to reduce idle speed, clockwise to increase it
Contents
HPI Nitro Star T-15L Engine with Pullstarter, Air Filter with Two Elements, R4 Glow Plug, Rotary Carburetor and instruction Manual
Requirements
Fuel: Car blend glow fuel with 20-25% nitro content
Glow starter and track equipment
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more