HPI K4.6 High Output Hellfire Engine 15204

HPI K4.6 High Output Hellfire Engine 15204

This is the HPI K4.6 High Output Pull Start Engine for the HPI Hellfire, HPIC1050.

Features

• HPI K4.6 High Output Hellfire Engine 15204

• Composite body slide valve carburetor

• High flow 2-stage foam air filter

• Rear exhaust

• Two year limited warranty

Specifications

• Displacement: 0.28 cu in (4.59cc)

• Bore: 18.6mm

• Stroke: 16.9mm

• Practical RPM: 3,100 - 39,500

• Maximum Horsepower: 2.95 hp @ 38,000 rpm

• Maximum RPM: 41,000

• Carburetor Bore: 9.0mm with 8.0mm and 8.5mm reducer

• Distance Between Mounting Holes Same Side: 0.83" (21mm)

• Distance Between Mounting Holes Opposite Side: 1.5" (38mm)

• Height Bottom of Mounting Tabs to Top of Cylinder Head: 3.8" (97mm)

• Width at Mounting Tabs: 1.8" (45mm)

• Width of Crankcase Below Mounting Tabs: 1.2" (39mm)

• Distance from Front Bearing to End of Crankshaft: 1.2" (30mm)

• Distance from Pull Start to Front Bearing: 3.4" (83.1mm)

• Distance from Center of Engine to Front Bearing: 1.7" (44mm)

• Distance from Center of Engine to Pull Start: 1.5" (38mm)

Contents

• HPI K4.6 High Output Pull Start Engine with air filter assembly, cold R5 glow plug (HPIG1504), rubber exhaust gasket and instruction manual

Requirements

• Fuel: Car blend with 20-25% nitro content

• Track Equipment: Glow starter, fuel tubing

?