HPI Nitro Star T-15 Engine w/Pull Start 15101
This is the Nitro Star .15 cu in (2.49cc)T-15 Pull Start Engine from HPI Racing This is the standard engine currently (1/15/04) being put in the Nitro MT 2, Rush Evo, & Nitro 3 Evo kits.
Features
HPI Nitro Star T-15 Engine w/Pull Start 15101
ABC construction
6mm Dual Needle Rotary carb
Side exhaust
Powder black case
Tall powder gray heatsink head (10 fins)
Aggressive porting
Standard shaft
Specifications
Carburetor: Rotary type, 6mm
Ports: 3
Weight: 10.2oz (290g)
Displacement: .15 cu in (2.49cc)
Horse Power: 1.2hp @ 29,000 RPM
Bore: 15.0mm
Stroke: 13.6mm
Distance between mounting holes front to back: 0.43" (11mm)
Distance between mounting holes side to side: 1.2" (31.5mm)
Overall width including mounting flanges 1.6" (40mm)
Overall height from bottom of crancase to top of head: 3.9" (100mm)
Overall length from back of recoil to end of shaft: 3.5" (88mm)
Diameter of head at largest point: 1.9" (49mm)
Length of shaft: 0.75" (19mm)
Length of threaded portion of shaft: 0.47" (12mm)
Distance between exhaust mounting holes: 1.1" (27.2mm)
This engine also includes mounting holes in the bottom of the crankcase. The specs for these are as follows.
Distance between mounting holes side to side: 0.72" (18.2mm)
Distance between mounting holes front to rear: 0.83" (21mm)
Contents
Glow plug, brass flywheel collet, air cleaner, instructions & decals
Requirements
Glow fuel and glow starter
Comments
This engine will also accept the #87120 (HPIP8720) HPI Roto Start System. This engine will easily & directly fit into any nitro car or truck that accepts small block (.12-.15) engines with pull starters. per HPI
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more