Rapid Fast Battery Quick Charger & Adapter Battery charger Adapter Universal Charger market. The Best ALL-IN-One Compact Universal Charger in the Market. Easy to read and use digital display makes charging any battery EXTREMELY simple. Buy this charger today and you will not regret it. Balances battery cells too.
Various Connectors Supported:
No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported.
Supports multiple types of battery packs with one single charger! The follow packs are supported:
NiMH/NiCD 1~15 cells ( 1.2v to 18v)
Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v)
Li-Fe 1~6 series
Sealed Lead Acid (SLA)
Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.
DC 11~18 volts
AC 100~240V, 50/60Hz
max. 50/5 Watts
0.1 to 5.0A
0.1 to 1.0A
No. of cycle
1 to 5 times
Battery data memory
up to 5 data
User's setting-up parameters
Battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
1 to 20mV
NiMH Delta-peak voltage sensitivity
1 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waiting time between charge/discharge
1 to 60 min.
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
Input DC power low alert
10 to 11V
Optimized operating software
When charging or discharging, TB6 has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.
Dual input power
TB6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum current of 5.0A.
Individual voltage balancer for Li-ion/Li-Polymer batteries inside
TB6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
Balance individual cells on discharge
TB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Accept various types of battery
TB6 can accept three types of batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.
Battery 'Fast' and 'Storage' mode
You can charge Li-ion/Li-Polymer battery for special purposes. 'Fast' charge reduces the charging time of battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
PC based analysis using USB communication
For technical expert, TB6 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the battery pack.
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.
We are not responsible for any damage caused by misuse or mishandling of batteries in charging.
Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging.
Constant Current Switch Power Supply
Input: 100-240V AC, 50/60Hz 2A
Output: 12V, 5A
Perfect for Micro-control LCD Li-Po Ballance Charger
Enter Coupon Code 'SAVERIGHTNOW' At Checkout For The Early Easter Surprise Super Sale On Everything.
Our personal shoppers love speaking and chatting with you. Click the button below to chat live or to be connected toll free for personal shopping assistance via telephone. You can also dial 1-800-350-5420 or click to chat.