Thunder Tiger 1/10 Tomahawk VX Nitro 2.4G RTR Nissan GT-RR35
This is the glow powered, 2.4GHz radio controlled, ready to run, 1/10 scale GTR Tomahawk VX Touring Car from Thunder Tiger.
Features
Thunder Tiger 1/10 Tomahawk VX Nitro 2.4G RTR Nissan GT-RR35
Chassis: Anodized aluminum alloy 0.12" (3mm) thick
Drive: Four wheel shaft drive fully ballraced
Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018), glow
plug and foam air filter
Exhaust: Aluminum tuned pipe, polished natural finish
Radio: Ace Cougar PS3 2.4GHz 3-channel with two standard servos
Bumper: Front foam
Differentials: Bevel gear
Transmission: Two-speed automatic
Clutch: Two shoe composite
Steering: Bellcrank type with servo saver and one-piece resin steering turnbuckles
Shocks: Composite body, oil filled
Body: Nissan GT trimmed and painted with decals for lights, grille and body trim
Wheels: Chrome plated plastic 1.02" (52mm) diameter, 1.02" (26mm) wide
Tires: Slick rubber 1.02" (26mm) wide, 2" (52mm) diameter with foam inserts
Ball Bearings: Full set, sealed
Suspension: Double wishbone
Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: Thunder Tiger guarantees this truck to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase
Specifications
Vehicle;
Length: 17" (432mm)
Width: 7.87" (200mm)
Height: 4.33" (110mm)
Weight: 3.63lbs (1650g)
Wheelbase: 10.43" (265mm)
Body;
Length: 17.6" (448mm)
Width: 7.9" (200mm)
Height: 4.2" (107mm)
Contents
RTR 1/10 scale Tomahawk Touring Car with .18 cu in engine, 2.4GHz radio, painted body and instruction manual
Requirements
Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break-in)
AA Batteries: 12, 8 for transmitter 4 for battery box
Building and track equipment
Comments
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x14mm Fr Diff 1 DTXC1583
2 8x14mm Rear Diff 1 DTXC1583
2 5x14mm Transmission
2 5x14mm Fr Drive Axle
4 10x15mm Fr Hubs 2 DTXC1595
4 10x15mm Rear Hubs 2 DTXC1595
4 5x8mm Steering Bellcrank 2 DTXC1523
1 5x8mm Clutch 1 DTXC1523
1 5x10 Clutch 1 DTXC1535
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more