Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF TOPA0906
This is the radio controlled, glow or electric powered, almost ready to fly Top Flite Cessna Skylane Gold Edition Airplane. IMAA Legal
Features
Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF TOPA0906
Construction: Balsa and ply
Wings: One-piece with plywood wing joiner
Aileron Control: Dual servo
Covering: Top Flite MonoKote
Cowl: Painted fiberglass
Cockpit Detail: Seats and instrument panel
Lights: Two landing lights in cowl, one navigational light on each wing and red MARS beacon light on top of fin (requires separate receiver battery)
Spinner: Polished aluminum, 2.25" (57mm) diameter
Landing Gear: Main, two piece fiberglass, Nosegear 0.20" (5mm) diameter prebent wire
Wheel Pants: Constructed of fiberglass, white in color
Wheels: Three foam, two main 3.25" (82mm) diameter, one nosewheel
2.75" (70mm) diameter
Engine Mount: Two-piece composite
Fuel Tank: 14oz (420cc)
Building Time: Ready to fly in 15-20 hours
Warranty: Top Flite� Models guarantees this kit to be free from defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or modification. In no case shall Top Flite's liability exceed the original cost of the purchased kit.
Specifications
Wingspan: 81 in (2060mm)
Wing Area: 898 sq in (57.9 dm2)
Weight: 11.5 - 12.5lb (5220 - 5670g)
Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm)
Length: 64 in (1630mm)
Airfoil: Semi-symmetrical
CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of the wing
Control Throws- Low Rate High Rate
Elevator: 3/4" (19mm) 10� 1-1/16" (27mm) 15�
Rudder: 5/8" (16mm) 9� 1" (25mm) 15�
Ailerons: 1/2" (13mm) 14� 5/8" (16mm) 17�
Flaps: 1/2 - 1" (25mm) 18� down
full - 2" (51mm) 36� down
Contents
Pre-built and covered wings, fuselage and tail assemblies, pushrods, fixed wire landing gear, aluminum spinner, dummy radial engine, two main wheels, two tail wheels, two-piece nylon engine mount, fuel tank, plywood servo and retract trays, aluminum wing joiners, hardware package, instrument panel decal, painted pilot bust, and photo-illustrated instructions
Requirements
Engine: .60-.91 cu in (10-15cc) two-stroke OR
.91-1.20 cu in (15-20cc) four-stroke OR
Motor: Rimfire 120 (50-65-450) Outrunner
LiPo Batteries: Two connected in series if using electric motor
Radio: 6-channel
Servos: Six standard with at least 44oz/in (3.2kg/cm) torque
24" (610mm) Servo Extensions: Two for ailerons
12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip lights
Y Harnesses: Two for aileron and flap surfaces
Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights
Comments
Following are the Top Flite MonoKote colors used to cover this model and order numbers for 6ft rolls;
Jet White TOPQ0204
Sapphire Blue TOPQ0226
Dove Gray TOPQ0211
Black TOPQ0208
?
?
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more