30mm CVK Scooter Carburetor Intake Boot - 60mm Bolt Spacing

30mm CVK Intake Boot for Scooters

This 30mm CVK carburetor intake boot joins a CVK-style carburetor to an intake manifold that uses a two-bolt flange with 60mm spacing. When an older boot develops cracks or leaks air, you may notice hard starting or a high idle, and swapping in a new one can fix those symptoms. It is one of the simpler scooter carburetors & jets items to replace yourself, and a good seal helps the engine run dependably.

Construction and Features

Made from tough rubber, the boot carries a molded "CVK Ø30" marking so you can identify it easily. Its bolt holes are lined with metal sleeves, which keep their shape once the bolts are tightened, giving a secure attachment to the intake manifold. A worm-drive hose clamp in a stainless style is included to hold the boot snugly on the carburetor.

Installation Guidance

Check the bolt spacing on your manifold and the diameter of your carburetor outlet before you begin. As you fit the boot, tighten the flange bolts evenly, then secure the clamp without pulling it too tight. Once everything is in place, you can test for air leaks by spraying carb cleaner around the boot while the engine idles; if the idle changes, there is likely a leak.

Specifications

• Part Number: F-48-1
• Carburetor Type: CVK, up to 30mm
• Bolt Hole Spacing: 60mm
• Inner Diameter (Carb Side): 35mm
• Inner Diameter (Manifold Side): 30mm
• Includes: Intake boot and hose clamp
• Color: Red
• Fits: CVK-style carburetors up to 30mm with a 35mm carb outlet and a two-bolt manifold flange at 60mm spacing

Fitment

How to choose: Measure the distance between the two flange bolt holes on your manifold. It needs to be 60mm, and the carb outlet needs to be 35mm for this boot to fit.

Shop more: Scooter Carburetors & Jets · Scooter Fuel System Parts · Scooter Parts