71" Split Throttle Cable 1-into-2 for Scooters & Mopeds (Standard)

71" Split Throttle Cable, 1-into-2, for Scooters and Mopeds

71" Split Throttle Cable 1-into-2 for Scooters and Mopeds. Throttle, brake and choke cables link your controls to the engine and brakes.

A sticky, frayed or stretched cable can make controls feel unpredictable. Make sure the cable length and end fittings match your original.

About this part

Keep the throttle and oil pump on your 2-stroke scooter working together with this 71" Split Throttle Cable. It is built for scooters that use a variable-rate oil injection pump. A single upper cable runs from the throttle grip to a junction box (splitter), which separates it into two lower cables. One lower cable moves the carburetor slide and the other moves the oil pump arm. It is a direct replacement for worn, frayed, or broken OEM split cable assemblies.

Highlights

• 1-into-2 Split Design: One upper cable divides at a junction box into two lower cables, one for the carb slide and one for the variable oil pump.
• 71" Overall Length: Sized for full-size 2-stroke scooters with longer cable runs through the frame.
• Carburetor End: Bent elbow housing with a barrel-style adjuster and rubber boot for a snug, quiet fit.
• Oil Pump End: Dual bare wire ends with square and cylindrical barrel nipples to engage the carb slide and oil pump lever.
• Upper Cable End: Threaded adjuster with brass ferrule for the handlebar-side connection.
• OEM-Style Construction: Black outer housing with stainless inner wire for smooth, corrosion-resistant operation.

Compatible Models

Made for 2-stroke scooters that use a 1-into-2 split throttle cable with a cable-actuated variable oil pump.

Fitment Note: Check the overall cable length and both lower cable end styles against your original cable before ordering. May fit the following scooters that used split throttle cables. Verify first.

• Piaggio / Gilera / Derbi 50cc 2-stroke: Piaggio NRG, Piaggio Zip, Gilera Runner, Derbi Atlantis, Derbi Bullet
• Minarelli-based 50cc 2-stroke (horizontal and vertical): Yamaha Zuma (2T), Aprilia SR50 (older 2T), Malaguti, CPI, Keeway
• Honda Elite SR: Elite 50 / SA50 / SR (variable oil injection generations)
• Genuine Scooter Company: Rattler 110
• Various other unlisted 2-stroke scooters and mopeds with 1-into-2 throttle cable setups

Technical Specifications

• Overall Length: 71 inches
• Cable Type: 1-into-2 split (single upper, dual lower)
• Application: 2-stroke scooters with variable-rate cable-actuated oil pump
• Upper End: Threaded adjuster with brass ferrule
• Lower Carb End: Bent elbow housing with barrel adjuster and rubber boot
• Lower Oil Pump End: Square barrel nipple + cylindrical barrel nipple (bare wire)

Fitment Note: Check the overall cable length and both lower cable end styles against your original cable before ordering. This cable is meant for 2-stroke engines with a cable-actuated variable oil pump, not for 4-stroke or fixed-flow oil injection systems.

Specifications

• Part type: Cables and Throttles
• Condition: New
• Fits: 2-stroke scooters with a 1-into-2 split throttle cable and cable-actuated variable oil pump (71" cable)

Fitment

Fits:

• Piaggio NRG, Piaggio Zip, Gilera Runner, Derbi Atlantis, Derbi Bullet (50cc 2-stroke)
• Yamaha Zuma (2T)
• Aprilia SR50 (older 2T)
• Malaguti, CPI, Keeway (Minarelli-based 50cc 2-stroke)
• Honda Elite 50, SA50, SR (variable oil injection generations)
• Rattler 110
• Other unlisted 2-stroke scooters and mopeds with a 1-into-2 throttle cable setup

How to choose: Match the overall length (71 inches) and both lower cable end styles (square and cylindrical barrel nipples) to your original split cable.

Shop more: Scooter Cables and Throttles · Scooter Parts