Associated 1/10 Factory Team RC10GT2 Kit Non-Pull Start 7080

Associated Factory Team RC10GT2 Kit Non-Pull Start 7080

This is the 1/10 scale glow powered, radio controlled, Associated Factory Team RC10GT2 Off-Road Truck Kit. Contains the following Factory Team Hop-ups; Finned Engine Mount PTFE-coated Threaded Shock Bodies with Collars Unobtainium Coated Shock Shaft Blue Aluminum Shock Bushings, Bulkhead, Hinge Pin Brace, Chassis Brace Black Hard Anodized 6061-T6 Aluminum Chassis CVA Joint with Quick Change Hubs 4 Steering Ball Bearings Blue Titanium Turnbuckles Blue Aluminum Rod-End Pivot Balls Polished Blue Anodized Tuned Pipe Blue Aluminum Servo Mounts and Flywheel Light Outdrives

Features

• Associated Factory Team RC10GT2 Kit Non-Pull Start 7080

• Chassis: Anodized 6061 aluminum with molded front kickup and modular radio tray, dual deck layout, blue aluminum front bulkhead

• Drive: Rear wheel drive

• Drive Shafts: Dogbones

• Exhaust: Blue anodized tuned muffler - ASCG1774

• Fuel Tank: 2.8oz (82cc) flip top cap - ASCC7899

• Clutch: Large diameter 2-shoe for SG type crankshafts

• Transmission: Single-speed, 4.09:1 ratio

• Ball Bearings: Full set shielded type

• Shocks: Four oil-filled, with coil-over springs, PTFE coated

• Main Gear: 54 tooth - ASCC7955

• Receiver Box: Sealed - ASCC7896

• Differential: Ball diff

• Brakes: Free floating disc

• Tires: Front Proline Edge M3 2.2" diameter 2" wide - PROC8097

• Tires: Rear Proline Bowtie M3 2.2" diameter 2.0" wide - ASCC7879

• Wheels: 2.2" diameter, 2" wide - ASCC7846 front - ASCC7980 rear with Posi-Lock quick change rear wheel system with five-lug self- aligning design for fast pit stops without having to worry about lining up the wheel onto a hex or drive pin. Posi-lock quick change system is lightweight for reduced unsprung weight and rotating mass

• Body: Clear untrimmed Associated Interceptor Truggy - ASCC7992

• Caster: Adjustable, caster/toe-in refers to the angle of the front  suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Steering: Dual ball bearing, dual bell-crank with adjustable servo saver, heavy duty steering blocks

• Turnbuckles: Factory Team, blue anodized titanium

Specifications

• Vehicle:

• Length: 16.5" (420mm)

• Width: 13" (330mm)

• Height: 6" (152mm)

• Weight: 4.1 lbs (1850g)

• Wheelbase: 11.2" (285mm) adjustable

• Tread- Front- 11" (280mm) Rear- 10-7/16" (276mm)

• Front Track: 12.75" (325mm)

• Rear Track: 12.5" (320mm)

• Ground Clearance: 1.5" (37mm)

• Gear Ratio: 4.09:1

• Tires- Front: 2.2" x 2"

• Rear: 2.2" x 2"

• Body-

• Length: 17" (431mm)

• Width: 6.5" (165mm)

• Height: 4.25" (108mm)

Contents

• Associated Factory Team RC10GT2 Off-Road Truck Kit with oil-filled shocks, tires, wheels, body, decals, 20 tooth bell, 54 tooth spur, hardware and illustrated building instructions.

Requirements

• Radio: 2-channel with 2 standard servos

• Transmitter Batteries: Eight AA size

• Receiver Battery: 5-Cell Hump Pack - DTXM2010

• Engine: .12-.15 cu in (2.0 -2.4 cc) non pull start with SG (pilot)  style crankshaft and rotary carburetor (standard crankshafts will fit using #2312 (ASCC4312) optional Clutch Nut)

• Glow Starter: 1.2 volt

• Paint: Polycarbonate safe for body

• Misc. Items: Fuel bottle, building and track equipment

• Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant

• Miscellaneous building and field equipment