Associated 25352 AE Pro .28 Engine

Associated 25352 AE Pro .28 Engine

This is the Pro .28 High-Performance Racing Engine from Associated.

Features

• Associated 25352 AE Pro .28 Engine

• Direct replacement engine for the Associated RC8RS buggy

• Associated Pro Start (ASCP5262) compatible backplate

• Slide valve carburetor

• SG crankshaft

• Ten fin heatsink

Specifications

• Displacement: .28cu in (4.6cc)

• Specs such as Bore, Stroke and Horsepower not provided by manufacturer

• Distance between Mounting Hole Centers Same Side: 0.83" (21mm)

• Distance between Mounting Holes Opposite Side: 1.5" (37.5mm)

• Width at Mounting Tabs: 1.8" (45.5mm)

• Width below Mounting Tabs: 1.3" (31.2mm)

• Height/bottom of Mounting Tabs to top of Cylinder Head: 3.7" (94.5mm)

• Height/bottom of Crankcase to top of Cylinder Head: 4.2" (106mm)

• Distance from Backplate to Front Bearing: 2.9" (74mm)

• Distance from Backplate to End of Crankshaft: 4.1" (104mm)

• Carburetor Settings;

• High Speed Needle: Turn clockwise until it bottoms out, then turn counterclockwise 2-3/4 turns

• Low Speed Needle: Turn clockwise until it bottoms out, then turn counnterclockwise 6-1/4 turns

• Idle Speed Screw: Turn until opening inside throttle valve is .030" (0.7mm)

Contents

• Associated Pro .28 Engine with slide valve carburetor, pinch bolt, air filter assembly and instruction manual

Requirements

• Fuel: 2-cycle glow fuel with 10%-15% nitromethane and at least 16% oil content

• Glow Plug: Medium to hot heat range suitable for off-road use

• Track equipment

Comments

• Will not fit the Associated Nitro TC3 or GT2.