Castle Creations Phoenix-30 30A Hi Volt Brushless ESC

Castle Creations Phoenix-30 30A Hi Volt Brushless ESC

This is the Castle Creations Phoenix-30 High Voltage Electronic Speed Control. For use with Brushless motors only.

Features

• Castle Creations PHXHV-30 Phoenix-30 Hi Volt ESC Brushless

• Extremely Low Resistance (0.005 Ohms)

• Safe "Power On" arming program ensures motor will not accidentally turn ON

• Low torque soft start protects gear boxes and belt drives from shock

• Dual Opto-Coupled (No BEC)

• Microprocessor controlled tough surface mount construction

• Audible arming signal

• 10AWG wiring for motor and battery leads

• Smooth reverse exponential throttle

• Self-calibrating endpoints maximize usable stick travel

• Auto shut-down when throttle is lost

• Simple setup, no complicated switches or wiring

Specifications

• Length: 2" (50mm) with capacitors

• Width: 1" (25.4mm)

• Height: 0.5" (13mm)

• Weight: 1oz (27g) wires included

• Throttle RF Shielding: Opto Isolated Throttle Cable

• Castle Link Compatible: Yes

• Max Input Voltage: 50 volts

• Max Amp Draw: 30 amps

• Resistance: 0.005 ohms

• Wire size for motor and battery leads: 10AWG

Package Contents

• Phoenix 30 High Voltage speed control w/universal connector, 10AWG motor and battery wires and instruction sheet

Requirements

• Bullet-type motor connectors.

• Suggested Connectors: 3.5mm (GPMM3112 GPMM3113)

• Battery Connectors - depends which connector is used on battery.

• Suggested Connectors: Ultra plugs (WSDM3001)

Comments

• This speed control does NOT feature BEC. You must use an alternate power source for your receiver and servos.