Eagle Tree Systems FDR-STD-KIT R/C Flight Data Recorder V2

Eagle Tree Systems FDR-STD-KIT R/C Flight Data Recorder V2

This is the Eagle Tree R/C Flight Data Recorder V2.

Features

• Eagle Tree Systems FDR-STD-KIT R/C Flight Data Recorder V2

• New smaller USB Flight Data Recorder

• Integrated RPM and temperature sensing

• Flight data recorder with USB port for reading flight data

• Continuous inflight logging of: ailerons, rudder, throttle, elevator, altitude, airspeed and receiver battery voltage

• USB based PC flight playback

• After you have flown you can review the flight with your PC, you'll be able to review:
  -Notifications - information about the flight
  -Airspeed - airspeeds from 9 to 290 mph
  -Altitude - information in graphic and numeric format
  - will record up to 25,000 feet
  -Flight Length/Progress - records total length of flight or up to
  a certain point
  -Max/Min/Current - When stopped, these readouts indicate the
  max airspeed detected, the lowest battery voltage detected and
  the highest altitude detected

• When playing back, these meters indicate the current speed, battery current speed, battery level and altitude

• Battery Voltage - indicates the current voltage during playback

• Fully compatible with Windows 98SE, ME, Windows 2K and XP

Specifications

• Flight recorder:Length: 1-15/16" (49mm)
                        Width: 1-5/16" (32mm)
                       Height: 11/16" (16mm)

• Current draw: 35 mA

• Recorder weight: 1 oz

• Recorder weight with cables: 1.5 oz

• Voltage:          4.8-6.0v

Contents

• Flight Data Recorder

• USB cable

• Four "Y" cables with Futaba J plugs

• Pitot tubing

• Plastic Pitot tubing extension

• 1 Temperature Sensor

• 1 RPM sensor

• Two sets of magnets

• Battery backup harness

• Setup Cd-Rom

• Instruction sheet

Requirements

• A plane that is large enough to accomodate the extra equipment

Comments

• Extra Pitot airspeed tube: ETRP2000

• Electric Expander: ETRP9001
  
  ?