Hot Bodies 28501 Powerhouse .26 w/Recoil

Hot Bodies 28501 Powerhouse .26 w/Recoil

This is the .26 Powerhouse Engine by Hot Bodies. Fits HPI Savage .21, and the Hot Bodies Lightning series buggies and popular .21 engined vehicles.

Features

• Hot Bodies 28501 Powerhouse .26 w/Recoil

• ABC construction

• 6-Port sleeve

• Large Purple heat sink head

• Round port rear exhaust

• Pull-start

• 3 needle slide valve carb

• SG (Pilot Shaft) style crankshaft

• Glow Plug included

• Brass collett included

Specifications

• Horsepower: 2.6HP @ 28,000 RPM

• Distance between mounting holes same side: 0.83" (21mm)

• Distance between mounting holes opposite side: 1.5" (38mm)

• Distance from pull starter to end of crankshaft: 4.6mm (116mm)

• Distance/center of crankcase to end of crankshaft: 3" (76mm)

• Width between mounting ears: 1.8" (46mm)

• Height/bottom of mounting ears to top of cylinder head: 3.8" (97.5mm)

• Height/bottom of crankcase to top of cylinder head: 4.4" (112mm)

• Factory Needle settings: High-Speed 3-1/2 turns

• Low-Speed 3-1/2 turns

• Midrange 3-1/4 turns

• Temp range: 210�F-275�F

Package Contents

• One .26 (4.26cc) sized engine with pull-start Instruction sheet

Requirements

• Air filter depending on vehicle

• 10%-30% Nitro Fuel with at least 18% lubricant

Comments

• Although this engine has 3.5cc printed on the side of the crankcase its displacement is 4.26cc.