HPI 1/8 Savage X SS K4.6 Kit 861

• HPI 1/8 Savage X SS K4.6 Kit 861

• Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)

• Drive: Four wheel shaft drive with heavy duty dogbones

• Engine: HPIG1501, HPI K4.6 28 cu in (4.6cc) with 2.9 horsepower, with pull-starter, ABC construction, 8 port chrome plated brass sleeve for high RPM operation, lightweight aluminum piston and connecting rod, 8.5mm composite slide valve carburetor for improved high temperature tuning, glow plug and dual stage air filter

• Exhaust: Dual chamber polished aluminum tuned pipe with header

• Fuel Tank: 5.4oz (160cc), flip top cap

• Clutch: Three shoe

• Transmission: Two-speed with adjustable slipper clutch and heavy duty metal gears

• Ball Bearing: Full set of rubber sealed bearings

• Shocks: Eight oil-filled, long stroke with coil-over spring

• Main Gear: Steel, 47 tooth

• Gearbox: Sealed front and rear

• Differentials: Four gear planetary type with heavy duty diff shafts and alloy cases

• Brakes: Adjustable dual vented stainless steel discs

• Tires: Dirt Bonz, diameter: 5.71" (145.1mm), width 3.38" (85.8mm)

• sticky S compound with bone shaped tread for high traction on dirt

• Wheels: Chrome Warlock with 17mm hex, width: 2.2" (56mm), diameter 3.3" (83mm)

• Body: Pre-trimmed unpainted Nitro GT-2 with pre-cut decals

• Bumpers: High impact nylon front and rear skidplate type

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Suspension: Front and rear heavy duty reinforced suspension arms uprights and knuckles, wide track (nearly 17") (432mm) design

• Steering: Bell crank

• Servo Saver: Adjustable cam type for optimum steering response and extra servo gear protection

Specifications

• Vehicle-

• Length: 21" (533mm)

• Width: 16.8" (427mm)

• Height: 10" (254mm)

• Wheelbase: 13.25" (336mm) wheels on-center front-to-rear

• Suspension Travel: 6" (152mm)

• Tires: diameter: 5.71" (145.1mm), width 3.38" (85.8mm)

• Body-

• Length: 19.2" (488mm)

• Width: 8.7" (221mm) at rear wheels, widest point

• 7.2" (184mm) behind from wheels, thinnest point

• Height: 4.9" (125mm)

Package Contents

• One HPI Savage X SS Monster Truck kit with oil shocks, K4.6 engine, clear body, decals, tires, foam inserts, 6 spoke chrome wheels 17 tooth clutch bell, 47 tooth spur gear, instructions

Requirement

• Radio: 2-Channel with 1 standard servo for throttle, 1 high torque servo for steering, and 1 standard size and torque servo if the optional reverse module (HPIC8739) is purchased.

• *If using the optional reverse module a 3-channel radio must be used.

• Radio Batteries: (8) AA size

• Receiver Pack: 6V 5-cell hump configuration

• Wall Charger: For receiver pack

• Glow Starter: 1.2V

• Paint: Polycarbonate for body

• Misc. Items: Fuel bottle, building and track equipment

• Fuel: 2-stroke glow fuel with 20% nitromethane, 16% lubricant