HPI Baja 5B SS Kit w/Clear Body 10610

• HPI Baja 5B SS Kit w/Clear Body 10610

• Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal gray in color, constructed of aircraft grade 6061 T6 aluminum, side guards protect engine from dirt and debris

• Drive: Rear wheel gear drive with heavy duty dogbones

• Engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter, quick release foam air filter, primer, choke and kill switch

• Servo: Water proof, metal gear high torque 25kg-cm steering servo speed, 0.16 sec at 60�

• Ball Bearings: Full set included

• Shocks: Four VVC heavy duty aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces, modified rear shock tower brace

• Main Gear: 57 tooth composite construction

• Gearbox: Sealed, heavy duty metal gears

• Differential: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears, aluminum alloy diff case

• Brakes: Ventilated dual disc

• Clutch: 2-shoe, 8000 RPM

• Gas Tank: 25.3 oz (750cc)

• Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter

• Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter

• Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue

• Body: Clear pre-cut

• Rear Wing: Molded black plastic with decals applied

• Roll Cage: Baja style high impact nylon protects engine and body from crash damage

• Suspension: Fully adjustable, long travel double wishbone

• Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Warranty: 2-year limited, valid only in USA, Canada and South America

Specifications

• Vehicle-

• Length: 32.2" (817mm)

• Front Width: 18.1" (460mm)

• Rear Width: 18.9" (480mm)

• Height: 10" (255mm) with 1G, 11" (280mm) with 0G

• Ride Height: 3" (76mm)

• Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)

• Weight: 21.3 lbs (9.6kg) without fuel

• Wheelbase: 22.4" (570mm) wheels on-center front-to-rear _

• Front Track: 15.5" (395mm)

• Rear Track: 15.7" (400mm) outer edges of wheels

• Gear Ratio: 8.382:1

• Tires-

• Front: 2.4" (60mm) x 6.7" (170mm)

• Rear: 3.1" (80mm) x 6.7" (170mm)

• Body-

• Length: 22.9" (581mm)

• Width: 8.8" (224mm) at rear wheels (widest point) 3.25" (82mm) ahead of front wheels (thinnest point)

• Height: 4.75" (121mm) at highest point

Package Contents

• HPI Baja 5B SS kit, engine, steering servo, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease body, with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual, 3.4oz (100cc) Z191 2-cycle oil

Requirement

• Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle (do not use AM radio)

• Receiver Battery: 6V hump configuration, at least 3000mAh

• Battery Charger: Timed or paek for receiver pack

• Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil at 25:1 ratio,

• Transmitter Batteries: 8 AA

• Paint: Spray or brush-on for polycarbonate bodies

• Building and track equipment