RJ Speed 2104 Nitro Drag Pro Mod Car Kit

RJ Speed 2104 Nitro Drag Pro Mod Car Kit

This is the glow powered, radio controlled Nitro Pro Mod Car Kit from RJ Speed.

Features

• RJ Speed 2104 Nitro Drag Pro Mod Car Kit

• Chassis: Fiberglass, 0.06" (1.5mm) thick

• Engine Mounts: Adjustable aluminum

• Axle Gear: 32 pitch

• Rear Axle: Solid, constructed of stainless steel

• Tires: O-ring front, Rear foam 1.5" (38mm) wide with six spoke black wheels

• Body: Clear lexan

• Fuel Tank: 1oz (29.6cc), with rear mount

Specifications

• Body;
  Length: 18.8" (478mm)
  Width: 7.3" (185mm) at front wheels, narrowest point
  7.75" (196mm) behind rear wheels, widest point
  Height: 4.5" (114mm)

Contents

• Nitro Pro Mod Kit with body, 32P axle gear, wheels, fuel tank hex wrenches, window mask and instructions

Requirements

• Engine: .12 -.18 cu in (2.0 - 2.9cc) short shaft recommended

• **RJ Speed #5145 Engine Mount Spacers, RJSC5145 if using engine with

• pull starter

• Clutch Assembly: to match selected engine

• Radio: 2-channel with two standard servos

• Misc Items: Air filter, muffler, fuel tubing, tools and track equip.

Comments

• To upgrade from bushing to ball bearings, order;
  Qty.                         Size                      Qty.                Bearing Set
  4              1/8 x 5/16" Flanged                 2                  DTXC1403
  2              1/4 x 3/8" Flanged                   1                  DTXC1433
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  ?

?