Royal Alloy GT150 / GP300S CD-F049 Brake Pad Set 40mm

Brake Pad Set for Royal Alloy GT150 and GP300S

This pad set is made for the front-left caliper on Royal Alloy GT150 and GP300S scooters. Fitting new pads in place of worn ones brings back dependable stopping power, whether you are riding in heavy stop-start traffic or taking a casual trip. It is one of the Royal Alloy scooter parts that helps your scooter keep its braking efficiency.

Pad Layout

The set contains two pads of different shapes, sized to suit a single caliper exactly. One pad is longer than the other, so the pair lines up with your current setup. Each pad carries a CD-F049 mark on its backplate, which makes it simple to identify the pads and confirm they match.

Measurements and Sizing

Checking the measurements helps make sure the pads fit correctly. The pin-hole spacing is 40mm, and the two pads have different backplate lengths. The longer pad is 97.5mm overall and the shorter pad is 77.3mm. Both pads are 42mm wide and 9mm thick, so they work as direct replacements.

Specifications

• OEM Part Number: LD227
• Backplate Marking: CD-F049
• Pin-Hole Spacing: 40mm
• Longer Pad Length: 97.5mm
• Shorter Pad Length: 77.3mm
• Width: 42mm
• Thickness: 9mm
• Quantity: Two pads for one caliper
• Fits: Royal Alloy GT150 and GP300S front-left caliper (two-pad set, CD-F049 pattern)

Compatibility

Works with:

• Royal Alloy GT150 (front-left caliper)
• Royal Alloy GP300S (front-left caliper)

Selecting the right set: Measure your old pads before ordering. The longer pad should be 97.5mm and the shorter one 77.3mm, with 40mm between the pin holes.

Installation location: part #10 on the front brake system diagram for the GP300S; part #4 on the f22a brake system front diagram for the GT150.

Browse further: Royal Alloy Scooter Parts · Scooter Brake Pads & Shoes · Scooter Brake Parts · Scooter Parts