Thunder Tiger 4856-K10 Titan X50 Kit Torque-Tube Driven Tail

Thunder Tiger 4856-K10 Titan X50 Kit Torque-Tube Driven Tail

This is the radio controlled, glow powered, Titan X50 Torque-Tube 50 Class 3D Helicopter.

Features

• Thunder Tiger 4856-K10 Titan X50 Kit Torque-Tube Driven Tail

• Tail Drive: Torque tube driven tail rotor for crisp rudder response and 100% power transfer, lightweight 0.92oz (26g) metal tail case with 6mm transfer shaft

• Main Blades: Carbon, 23.6" (600mm)

• Main Shaft: (10mm) hardened steel

• Feathering Shaft: 7mm

• Rotor Head: Metal underslung design

• Fan: Shrouded for efficient heat dissipation

• Canopy: Preprinted fiberglass

• Frame Sections: One-piece carbon, slim profile design, only 1.2" (30mm) wide

• Paddles: Lightweight 0.70oz (20g) for high 3D performance

• Fuel Tank: 16.2oz (480cc) total capacity of main and header tanks

• Landing Gear: Plastic with aluminum skids

• Tail Boom: Compound carbon/aluminum

• Receiver Tray: Lengthened for LiPo packs

Specifications

• Length: 47.24" (1200mm)

• Width: 7.87" (200mm)

• Main Rotor Diameter: 52.95" (1345mm)

• Main Rotor Length: 23.62" (600mm)

• Tail Rotor Length: 3.74" (95mm)

• Gear Ratio: 1:8, 5:4.56

• Fully Equipped Weight: 7.16lbs (3250g)

Contents

• Titan X50 Torque-Tube 50 Class 3D Heli, Canopy, Main Blades, Fuel Tanks, Tail Boom, Decals and Instruction Manual

Requirements

• Radio: At least 6-channel

• Servos: Four standard with digital rudder servo

• Gyro: Heading lock

• Flight Battery: 4.8V NiMH, at least 1200mAh

• Engine: .50 heli engine

• Glow Fuel: Heli blend with 15-30% nitro content

• Starting Shaft: 6mm hex size

• Electric Starter: 12V .90 size

• Remote Glow Starter

• Building and field equipment