Vespa P/PX 23x35x6 Flywheel Oil Seal

Flywheel Oil Seal for Vespa P/PX Models and Stella 150 2T

This flywheel oil seal is made for classic Vespa P/PX models and the Genuine Stella 150 2T. It measures 23 mm inside diameter, 35 mm outside diameter, and 6 mm thick, and it seals the flywheel area of the engine case. It is one of the vintage Vespa scooter parts that helps keep oil from leaking out of the engine while it runs.

What the Flywheel Oil Seal Does

The main job of this seal is to hold a snug fit around the flywheel area of the engine so oil stays inside. Keeping oil in matters for how the engine runs. When you rebuild or service an engine, swapping out a worn or damaged seal helps prevent later engine problems.

Things to Know Before Installing

This flywheel seal goes straight into the engine case in the spot where the old seal was taken out. Fitting it correctly helps the engine stay sealed and performing well on the road.

Specifications

• Inner Diameter: 23 mm
• Outer Diameter: 35 mm
• Thickness: 6 mm
• Position: Flywheel side
• Fits: Vespa P/PX Series engines and Stella 150 2T, flywheel side

Compatible Models

Fits:

• Vespa P/PX 125 (VNX P/PX 125)
• Vespa P/PX 150 (VLX P/PX 150)
• Vespa P/PX 200 (VSX P/PX 200 E)
• Stella 150 2T

Choosing the right size: Check that the old seal reads 23 x 35 x 6 mm, then install the new one on the flywheel side of the engine case.

Browse related parts: Vintage Vespa Parts · Vespa Parts · Scooter Gaskets & Seals · Scooter Stators & Regulators · Scooter Parts