Thunder Tiger 3872-K22M1 UH-Y w/Titan 50 Engine & BL

Thunder Tiger 3872-K22M1 UH-Y w/Titan 50 Engine & BL

This is the glow powered, Thunder Tiger Raptor 50 Titan 3D Helicopter Kit with the Pro-50H Engine and UH-1Y Military Scale Fuselage.

For Advanced to Expert Helicopter Pilots 14 Year of Age and Older.

Features

• Thunder Tiger 3872-K22M1 UH-Y w/Titan 50 Engine & BL

• Control System: 90� Collective Cyclic Pitch Mixing with new design for main rotor hub and mixing lever that delivers +/-15� collective pitch for very fast pitch response

• Autorotation Gear: Constant drive design allows aerobatics during autorotation

• Engine: Thunder Tiger Pro 50H with ringed piston, dual needle carburetor

• Exhaust: Aluminum hi-flow 3D pipe with diverter, black in color

• Main Blades: Fiberglass, white in color 23.6" (600mm) long

• Flapping Damper: Nonlinear for aggressive 3D flying

• Tail Drive: Belt type with metal guide pulleys on body and tail

• Tail Boom: Aluminum

• Body: FRP construction, painted, with decals applied

• Tail Rotor Blades: White plastic

• Vertical Fin: 3D design, constructed of carbon

• Aileron and Elevator Linkage: Push-pull

• Landing Gear: Nylon with aluminum skids

• Fuel Tank: 11.5oz (340cc)

Specifications

• Fuselage Length: 53.5" (1360mm)

• Fuselage Width: 9.4" (240mm)

• Total Height: 15.7" (400mm)

• Main Rotor Diameter: 54.53" (1385mm)

• Tail Rotor Diameter: 9.33" (237mm)

• Gear Ratio: 8.5:1:4.56

• Fully Equipped Weight: 8.8lbs (4kg)

Contents

• ARF Thunder Tiger Raptor 50 Titan 3D Helicopter Kit with UH-1Y Body, Pro 50H Engine, Remote Glow Plug Extension, Landing Gear, Fuel Tank and Instruction Manual

Requirements

• Radio: At least 6-channel

• Servos: Four standard with digital rudder servo

• Gyro: Heading lock

• Glow Plug: OS #8 recommended

• Flight Battery: 4.8V NiMH, at least 1200mAh

• Glow Fuel: Heli blend 15-30% nitro content

• Starting Shaft: 6mm hex size

• Flight Battery: 4.8V 1200mAh NiMH

• Electric Starter: 12V .90 size

• Remote Glow Starter

• Building and field equipment

Comments

• For Replacement Ball Bearings use:

•   Qty.  Size             Location                              Qty. Bearing

•    2     8x12mm       R& L Elevator Subassembly     1     DTXC1581

•    2     4x8mm         Elevator Push/Pull                  1     DTXC1511

•    4     6x13mm       Rotor Shaft                            2     DTXC1573

•    4     5x10mm       Tail Rotor Hub                        2     DTXC1535

•    2     4x7mm         Tail Pitch Control Lever            2      DTXC1507

•    4     4x7mm         Flybar Assembly                      2     DTXC1507

•    1     5x11mm       Tail Idle Pulley                        1      DTXC1547

•    1     4x7mm         Pitch Push-Pull Lever                1     DTXC1507