Futaba 6JA Air 2.4G SFHSS R2006GS 4-S3004 FUTK6001

Futaba 6JA Air 2.4G SFHSS R2006GS 4-S3004 FUTK6001

This is the Futaba 6JA 6-Channel 2.4GHz

S-FHSS and FHSS Selectable Mode Radio System with the R2006GS Receiver and four S3004 Servos.

This is the airplane version with the ratcheted throttle stick.

Features

• Futaba 6JA Air 2.4G SFHSS R2006GS 4-S3004 FUTK6001

• Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode

• 15 model memory with 4 character model naming

• 40x40 127 segment LCD display

• Mode 1-4 selectable

• R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity

• Fail safe (all channels in S-FHSS mode only)

• Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut

• Throttle position, mix and low battery warnings

• Trainer system (trainer cord not included)

• One year limited warranty through Hobby Services beginning at date of purchase

• Airplane Features;

•   Two programmable mixes and two 5-point throttle curves

•   Two 5-point pitch curves

•   Flaperon with differential rate

•   Flap trim (2 rates)

•   V-tail mixing

•   Elevon mixing

• Helicopter Features;

•   Two 5-point throttle curves

•   Three 5-point pitch curves

•   Throttle hold

•   Hover pitch

•   Gyro and revo mixing

•   Four swash plate types (H1, H3, HR3 & H3 w/AFR)

•   Swash AFR (ail/ele/pitch)

•   Throttle mix

•   Electronic swash ring

•   Throttle and pitch delay

Specifications

•   Transmitter;

• Type: 2-stick, 6-channel, FHSS/S-FHSS selectable

• Frame Rate: 6.8ms

• Current Drain: 170mA
    Receiver;

• Modes: FHSS or S-FHSS (auto selectable)

• Power Requirements: 4.8V-7.4V

• Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe

• Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)

• Weight: 0.29oz (8.3g)

• Current Drain: 80mA (@ no signal)

•   S3004 Servo;

• Speed: 0.23 sec/60� @ 4.8V

•            0.19 sec/60� @ 6.0V

• Torque: 44 oz-in (3.2 kg-cm) at 4.8V

•             57 oz-in (4.1 kg-cm) at 6.0V

• Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")

•   (40 x 20 x 36mm)

• Weight: 1.3 ounce (1-5/16oz) (37 grams)

• Connector: "J" type with approx. 5" wire

Contents

• Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch and ratchet spring

• Four S3004 Standard Ball Bearing Servos, FUTM0004

Requirements

• AA Cells: Four for transmitter