Futaba 6JH Heli 2.4G SFHSS R2006GS 4-S3001 FUTK6002
This is the Futaba 6JH 6-Channel 2.4GHz
S-FHSS and FHSS Selectable Mode Radio System with the R2006GS Receiver and four S3001 Ball Bearing Servos.
This is the helicopter version with the non-ratcheted throttle stick.
Features
Futaba 6JH Heli 2.4G SFHSS R2006GS 4-S3001 FUTK6002
Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode
15 model memory with 4 character model naming
40x40 127 segment LCD display
Mode 1-4 selectable
R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity
Fail safe (all channels in S-FHSS model only)
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
One year limited warranty through Hobby Services beginning at date of purchase
Airplane Features;
Two programmable mixes and two 5-point throttle curves
Two 5-point pitch curves
Flaperon with differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Helicopter Features;
Two 5-point throttle curves
Three 5-point pitch curves
Throttle hold
Hover pitch
Gyro and revo mixing
Four swash plate types (H1, H3, HR3 & H3 w/AFR)
Swash AFR (ail/ele/pitch)
Throttle mix
Electronic swash ring
Throttle and pitch delay
Specifications
Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA
Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal)
S3001 Servo;
Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")
(40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Torque: 33 oz-in (2.4kg-cm) @ 4.8V
42 oz-in (3.0kg-cm) @ 6V
Transit: 0.28 sec/60� @ 4.8V
0.22 sec/60� @ 6V
Contents
Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch and ratchet spring
Four S3001 Standard Ball Bearing Servos, FUTM0029
Requirements
AA Cells: Four for transmitter
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more